Business Access Point LAPAC1750 Business AC1750 Dual-Band Access Point
Business Access Point LAPAC1750 Business AC1750 Dual-Band Access Point
Delivers the next generation of Wi-Fi technology (802.11ac) to provide data rates up to AC1750 Mbps.* Learn More
- Dual Band AC1750 Speed, 3X 11N Speed
- Single Point Control: Clustering**
- Range Boost with High-Power Antennas
- Captive Portal for Customized Wi-Fi Hotspot
- Band Steering
- Captive Portal
- Clustering
- Dual Image Support
- IGMP/MLD Snooping
- IPv6 Interface
- Scheduler
- Wireless Distribution System (WDS)
- Workgroup Bridge
- 1 x System LED
- 1.7dBi @2.4G, 1.9dBi @5G
- 9.57 x 9.33 x 1.72 inches
- 1.12lb
- High Power PA
- 10% to 85% non-condensing
- 0° to 40°C (32° to 104°F)
- 1 x 12V/1.5A power port
- 1 x Gigabit LAN Port with IEEE 802.3at PoE+
- Ceiling
- Wall
- 802.1X Supplicant
- Channel Isolation
- Mac-Based Access Control
- Multiple SSIDs (16)
- RADIUS
- Rogue AP Detection
- SSID Broadcast
- SSID to VLAN Mapping
- Wi-Fi Protected Access (WPA/WPA Mixed, WPA2) Personal and Enterprise
- Bandwidth Management
- WMM
- -20° to 70°C (-4° to 158°F)
- Limited Lifetime Warranty
- Local Log, Remote Syslog, and Email Alert
- 2.412 to 2.462 GHz: 11 channels
- 5.180 to 5.240 GHz: 4 channels
- 5.745 to 5.825 GHz: 5 channels
- Clustering
- Internal PCBA Antenna
- 802.11a/g@54Mbps: -73dBm
- 802.11b @11Mbps: -85dBm
- 802.11n@HT20 MCS7: -67dBm
- 802.11n@HT40 MCS7: -65dBm
- FCC, CE, IC
- 15W
- HTTP
- HTTPS
- SNMP
- Reset Button
- 10% to 90% non-condensing
- Log, Ping, Packet Capture
- Kensington Security Lock
- IEEE 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac
- Power over Ethernet Plus (PoE+) IEEE 802.3at
- WMM - Wireless Multimedia Prioritization
- One Access Point
- Quick Start Guide
- Ethernet Cable
- AC Power Adapter
- CD with Documentation
- Mounting Bracket
- Mounting Kit Screws
- Ceiling Mount Back plate
- Drilling Layout Template
*Maximum Performance derived from IEEE Standard 802.11 specifications (draft specifications for 802.11ac). Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends upon many factors, conditions and variables, including products used, interference and other adverse conditions. 802.11ac 1300 Mbps in the 5GHz Band is approximately 3 x faster than 802.11n 450 Mbps in the 2.4GHz Band. An 802.11ac adapter will be needed to achieve 11ac data rates and up to 1300 Mbps wireless speeds may be achieved when connecting to other 802.11ac 1300 Mbps devices.
**May require a software/firmware update available for download at linksys.com/support. APs are clustered with the same model number; e.g., a LAPAC1200 cannot be clustered with a LAPAC1750.