Business Access Point LAPN300 Business Access Point Wireless Wi-Fi Single Band 2.4GHz N300 with PoE
https://www.linksys.com/lapn300-business-access-point-wireless-wi-fi-single-band-2.4ghz-n300-with-poe/LAPN300.html
Business Access Point LAPN300 Business Access Point Wireless Wi-Fi Single Band 2.4GHz N300 with PoE
$4 OFF
Business Access Point LAPN300 Business Access Point Wireless Wi-Fi Single Band 2.4GHz N300 with PoE
LAPN300 Business Access Point Wireless Wi-Fi Single Band 2.4GHz N300 with PoE.
$4 OFF
- Out of Stock This item is currently not available
Employs Wi-Fi technology (802.11n) to provide a fast, powerful wireless network at a transfer rate of up to 300 Mbps.*
- Integrated Power over Ethernet
- Single Band (2.4GHz) capability and speeds up to 300 Mbps
- Industrial-strength Wi-Fi Protected Access (WPA, WPA2) security and data encryption
- IPv6 Support
- High Power PA for better Wi-Fi coverage
LEDs
- One system LED
Antenna Gain
- 1.8 dBi
Workgroup Bridge
- Yes
Rogue AP Detection
- Yes
Dimensions (LxWxH)
- 243.08 x 236.98 x 43.69 mm (9.57 x 9.33 x 1.72 in)
External Power Adapter
- 12V/1A
- WPA2
Weight
- 489.88 g (1.08 lb)
shared8021XSupplicant
- Yes
Number of VLANs Supported
- 9, 1 management VLAN plus 8 VLANs for SSID
RF Transmit Power
- 802.11b @ 11 Mbps: 21 dBm
- 802.11g @ 54 Mbps: 20 dBm
- 802.11n @ HT20/HT40 MCS7/15: 19 dBm
Operating Humidity
- 10% to 85% (non-condensing)
Operating Temperature
- 0° to 40°C (32° to 104°F)
Ports
- 1 Gigabit Ethernet Port
Reset Button
- Yes
Mounting
- Ceiling
- Desktop
- Wall
WMM
- Yes
Storage Temperature
- -20° to 70°C (-4° to 158°F)
Warranty and Support
- Limited Lifetime
Event Notification
- Local Log, Remote Syslog, and Email Alert
Radio Frequency Channels
- 2.412 to 2.462 GHz; 11 channels
Scheduler
- Yes
SSID to VLAN Mapping
- Yes
Wireless Security
- 802.1X RADIUS
- WEP
- WPA
- WPA2
Antenna Type
- Internal
PoE
- 802.3af
- 802.3at
Receive Sensitivity
- 802.11b @ 11 Mbps: -85 dBm
- 802.11g @ 54 Mbps: -70 dBm
- 802.11n @ HT20 MCS7/15: -65 dBm
- 802.11n @ HT40 MCS7/15: -62 dBm
Access Control
- MAC-Based
Regulatory Compliance
- Class B, Wireless
- FCC, CE, IC
Maximum Power Consumption
- 12.5W
Management Interface
- HTTP
- HTTPS
- SNMP
Storage Humidity
- 10% to 90% (non-condensing)
Network Diagnostics
- Log, Ping, Packet Capture
Security Lock
- Kensington Lock Slot
MIMO
- 2x2
Network Standards
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11n
External Power Amplifier
- Yes
Isolation of Wireless Clients in the Same SSID
- Yes
- Linksys LAPN300 Wireless-N300 Access Point with PoE
- Quick Start Guide
- Ethernet Cable
- AC Power Adapter
- CD with Documentation
- Mounting Bracket
- Mounting Kit Screws
- Ceiling Mount Back plate
- Drilling Layout Template
*Maximum Performance derived from IEEE Standard 802.11 specifications (draft specifications for 802.11ac). Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends upon many factors, conditions and variables, including products used, interference and other adverse conditions.
**May require a software/firmware update available for download at linksys.com/support. APs are clustered with the same model number; e.g., a LAPN300 cannot be clustered with a LAPN600.