Business Access Point LAPN600 Business Dual Band N600 WiFi 4 Access Point
https://www.linksys.com/lapn600-business-dual-band-n600-wifi-4-access-point/LAPN600.html
Business Access Point LAPN600 Business Dual Band N600 WiFi 4 Access Point
$35 OFF
Business Access Point LAPN600 Business Dual Band N600 WiFi 4 Access Point
Business Access Point Wireless Wi-Fi Dual Band 2.4 + 5GHz N600 with PoE. Employs Wi-Fi technology (802.11n) to provide a fast, powerful wireless network at a transfer rate of up to 600 Mbps.*
$35 OFF
- Out of Stock This item is currently not available
- Integrated Power over Ethernet
- Dual Band (2.4 GHz + 5 GHz) capability and speeds up to 600 Mbps*
- Industrial-strength Wi-Fi Protected Access (WPA, WPA2) security and data encryption
- IPv6 Support
- High Power PA for better Wi-Fi coverage
LEDs
- One system LED
Antenna Gain
- 1.8 dBi @ 2.4 GHz;
- 3.5 dBi @ 5 GHz
Workgroup Bridge
- Yes
Rogue AP Detection
- Yes
Dimensions (LxWxH)
- 243.08 x 236.98 x 43.69 mm (9.57 x 9.33 x 1.72 in)
External Power Adapter
- 12V/1A
- WEP
Weight
- 498.95 g (1.10 lb)
shared8021XSupplicant
- Yes
Number of VLANs Supported
- 17, 1 management VLAN plus 16 VLANs for SSID
RF Transmit Power
- 802.11b @ 11 Mbps: 21 dBm
- 802.11g @ 54 Mbps: 20 dBm
- 802.11n @ HT20/HT40 MCS7/15: 19 dBm
Operating Humidity
- 10% to 85% (non-condensing)
Operating Temperature
- 0° to 40°C (32° to 104°F)
Ports
- 1 Gigabit Ethernet Port
Reset Button
- Yes
Mounting
- Ceiling
- Desktop
- Wall
WMM
- Yes
Rate Limiting
- Yes, Bandwidth Management per SSID
Storage Temperature
- -20° to 70°C (-4° to 158°F)
Warranty and Support
- Limited Lifetime
Event Notification
- Local Log, Remote Syslog, and Email Alert
Radio Frequency Channels
- 2.412 to 2.462 GHz; 11 channels
- 5.180 to 5.240 GHz; 4 channels
- 5.745 to 5.825 GHz; 5 channels
Scheduler
- Yes, Time-based profiles per SSID
SSID to VLAN Mapping
- Yes
Wireless Security
- 802.1X RADIUS
- WEP
- WPA
- WPA2
Antenna Type
- Internal
PoE
- 802.3at
Receive Sensitivity
- 802.11a/g @ 54 Mbps: -70 dBm
- 802.11b @ 11 Mbps: -85 dBm
- 802.11n @ HT20 MCS7/15: -65 dBm
- 802.11n @ HT40 MCS7/15: -62 dBm
Access Control
- Yes, MAC based ACL with local or remote RADIUS server authentication
Regulatory Compliance
- Class B, Wireless;
- FCC, CE, IC
Maximum Power Consumption
- 17W
Management Interface
- HTTP
- HTTPS
- SNMP
Band Steering
- Yes
Storage Humidity
- 10% to 90% (non-condensing)
Network Diagnostics
- Log, Ping, Packet Capture
Security Lock
- Kensington lock slot
MIMO
- 2x2
Network Standards
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11n
External Power Amplifier
- High Power PA
802.1q VLAN
- Yes, 802.1q-based VLAN
Isolation of Wireless Clients in the Same SSID
- Yes
- Wireless-N600 Dual Band Access Point with PoE (LAPN600)
- Quick Start Guide
- Ethernet Cable
- AC Power Adapter
- CD with Documentation
- Mounting Bracket
- Mounting Kit Screws
- Ceiling Mount Back plate
- Drilling Layout Template
*Maximum performance derived from IEEE Standard 802.11 specification. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.
**May require a software/firmware update available for download at linksys.com/support. APs are clustered with the same model number; e.g., a LAPN300 cannot be clustered with a LAPN600.