Changing the wireless settings on the PLW400 through the web-based setup page

This article will guide you on how to change the wireless settings on your Linksys PLW400 Powerline AV Wireless Network Extender through its web-based setup page.  Follow the steps below to learn how:

Step 1:
Access the web-based setup page of your PLW400.  For instructions, click here.

Step 2:
On the Setup page, click the Wireless tab.

Step 3:
Select the Manual radio button.  Enter the name that you want to use for your network on the Network Name (SSID) field then click Save Settings.

Step 4:
Click Wireless Security then enter the password that you want in the Passphrase field.

NOTE:  The password should be at least eight (8) characters.  It is highly recommended to use WPA Personal for the Security Mode for better security on your network.

Step 5:
Click Save Settings.

Your wireless settings should now be changed.


Related Article:

Upgrading the firmware of the PLW400 through the web-based setup page
PLW400 Frequently Asked Questions

Was this support article useful?

Additional Support Questions?
Search Again