Linksys Cloud Manager 2.0 - Inventory page

The Linksys Business Cloud Access Points distribute secure Wi-Fi connection to different networks and provide cloud management features using Linksys Cloud Manager 2.0 so you can remotely monitor your organizations, access points, and networks.
 
The
 Inventory serves as a virtual deposit of access points that you are not using in the Linksys Cloud Manager.

Accessing the Inventory page
Adding a new access point to the Inventory
Moving an access point to the Inventory list
Moving an access point from the Inventory to a network
 

Accessing the Inventory page
 
Step 1:
Log in to the Linksys Cloud Manager 2.0.  For instructions, click 
here.

 
Step 2:
Select an organization.  If there's only one organization, you will automatically have access to the Linksys Cloud Manager; if there are two or more, select and enter one.


Step 3:
On the upper left corner of the screen, click Inventory.
 
sf317464-001_en_v4.png
 
Adding a new access point to the Inventory

Make sure that the access point is connected to the internet before adding it to the Inventory. 

 
Step 1:
Log in to the Linksys Cloud Manager 2.0.  For instructions, click 
here.

 
Step 2:
Select an organization.  If there's only one organization, you will automatically have access to the Linksys Cloud Manager; if there are two or more, select and enter one.


Step 3:
On the upper left corner of the screen, click Inventory.

 
sf317464-002_en_v4.png
 
Step 4:
Click on Add a New Device.  If there is an existing access point in the Inventory, click on Add Access Point

sf317464-003_en_v4.png
 
Step 5:
Enter the serial number and MAC address for the access point you want to add then click on Next.  You can find the serial number and MAC address on the bottom of the device or on the box it came in.

sf317464-004_en_v4.png

Step 6:
By default, the MAC address is used as the name.  You can rename the device and click on Add.  Once the device is added to the Inventory, you can then add or move it to a network by performing the steps described in
this section.

 
sf317464-005_en_v4.png
 
Your access point has now been added to Inventory.
 
sf317464-006_en_v4.png

Moving an access point to the Inventory list
 
Step 1:
Log in to the Linksys Cloud Manager 2.0.  For instructions, click 
here.

 
Step 2:
Select an organization.  If there's only one organization, you will automatically have access to the Linksys Cloud Manager; if there are two or more, select and enter one.

 
Step 3:
From the Network list, select a network, click on
sf317464-007_en_v4.png, and then click on Devices.
 
sf317464-008_en_v4.png

Step 4:
From the Devices page, click on the  icon of a device, and select Move to Inventory.
 
sf317464-010_en_v4.png
 
Step 5:
Click on Move to confirm.

sf317464-011_en_v4.png

Moving an access point from the Inventory to a network
 
Make sure that the access point you want to move is in the Inventory.
 
Step 1:
Log in to the Linksys Cloud Manager 2.0.  For instructions, click here.

Step 2:
Select an organization.  If there's only one organization, you will automatically have access to the Linksys Cloud Manager; if there are two or more, select and enter one.

Step 3:
Click on the Inventory tab.

 
sf317464-012_en_v4.png

Step 4:
On the Inventory page, select an access point, click on
sf317464-013_en_v4.png, and then click on Add to network.
 
sf317464-014_en_v4.png

Step 5:
Select the network where you want to place the access point then click on Add.
 
sf317464-015_en_v4.png
 
If you click on the Networks tab, select the network and click on Devices.  You will now see the access point has been added to the network.
 
sf317464-016_en_v4.png

sf317464-017_en_v4.png

To learn more about the Linksys Cloud Manager 2.0, click on the following links:


Linksys Cloud Manager 1.0 to 2.0 Migration Guide
Linksys Cloud Manager 2.0 – Getting Started Guide

Was this support article useful?

Additional Support Questions?
Search Again