|Tool / Setting||Description|
The Device List page displays the list of devices that have connected to the router.
The Guest Access page allows you to configure WiFi settings for guests. Guest Access uses WPA2™ WiFi encryption.
Parental Controls is used to manage usage or block internet access on a connected device or of specific sites per device.
The router can give your devices priority for internet access. You can choose up to three devices – wired or wireless – to move to the front of the WiFi line. The rest of the devices on your network will share the remaining bandwidth. You might want to assign priority for work devices, devices that stream video, or devices that you use for online gaming.
The Speed Check feature measures the download (from the internet) and upload (to the internet) speeds of your WiFi. It is a good way to find out whether you are getting the level of service provided by your internet service provider (ISP).
Speeds may vary depending on several factors, including how many devices are connected to your WiFi and what those devices are doing.
Download Speed is the rate at which internet content is transferred to the router.
Upload Speed is how quickly you can upload content to the internet.
The Connectivity page shows the firmware version and model of the router.
The Connectivity page has the following tabs and corresponding settings that you can select or configure:
NOTE: With the latest firmware, new requirements will pop up to help you create a new password when there is an attempt to change the admin password.
The Troubleshooting page allows you to diagnose and troubleshoot problems you may be having in your network. It provides useful information about your connected devices and network details. You can also restart the router on this page.
This section allows you to manage and configure the settings for your WiFi. The Wi-Fi password is masked.
On the Wi-Fi Protected Setup tab, Wi-Fi Protected Setup™ is disabled by default.
Dynamic Frequency Selection (DFS)is also disabled by default. To enable it, go to the Advanced tab, toggle ON the button, click Apply then click Ok. While the router applies the changes, note that the WiFi will restart, and you will be disconnected momentarily. To learn more, click here.
Security settings keeps your WiFi safe from internet threats. You can also configure port forwarding and DDNS settings.