Manually configuring a Static IP Internet address for the Linksys Velop Mesh system using the Linksys app

If your internet service provider (ISP) provided a static internet IP address, the following instructions will show you how you can manually enter these settings through the Linksys app.
 

Requirements:
 
  • The latest version of the Linksys app downloaded from the App Store® or Google Play™ installed on your mobile device
  • Obtain the following settings from your ISP: 
 
  • Internet IPv4 IP Address
  • Subnet Mask
  • Default Gateway
  • Domain Name Server (DNS)

The steps and images may vary depending on the device you're using for setup. In the examples below, an iOS device is used.
 

 
1. Connect your mobile device to your Linksys Mesh WiFi network and launch the Linksys app.

2.
Log in to the Linksys app dashboard.

3. Tap on the menu icon 
sf335386-001-en_v1.png in the upper left corner of the dashboard.

4. Go to Advanced Settings > Internet Settings and then tap on Connection Type.


sf335386-002-en_v1.png

5. Select Static IP.

sf335386-003-en_v1.png

6. Enter the settings provided by your ISP then tap Save once done.

sf335386-004-en_v1.png

Was this support article useful?

Additional Support Questions?
Search Again