- Changing the LAN IP Address of the WGA11B
There are cases when the network’s IP segment is different from the WGA11B’s default IP segment. In cases like this, the game adapter’s IP address needs to be changed to avoid IP conflict between the network and the WGA11B.
Changing the LAN IP Address of the WGA11B
Connect the game adapter to your router using an Ethernet cable. For instructions, click here.
Insert the setup CD to your CD-ROM drive and run the setup wizard. A screen similar to Step 3 should appear.
Click Setup to begin the setup process.
The Setup Wizard will then search for the game adapter. If it cannot detect the presence of the game adapter, check the connections then click Continue.
The next screen will show the current settings of the game adapter then click Next to continue.
When the game adapter is located, enter “admin” on the Password field and click Enter.
Select Specify an IP Address and change the IP Address and make sure that the Gateway is the Router’s IP address.
NOTE: In this example, “192.168.2.225” was used for the IP Address and “192.168.2.1” for Gateway.
When the next screen shows the profile configuration, you may click No to finish the configuration or Yes if you want to configure another profile.
NOTE: In this example, No was clicked.
Click Exit to exit the Setup Wizard.
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.