- Setting up your Linksys Smart Wi-Fi Router to Bridge Mode using your Linksys cloud account
Setting up your Linksys Smart Wi-Fi Router to Bridge Mode is done for these purposes:
- When your Internet Service Provider (ISP) requires it.
- When you want to connect two (2) routers with the capability of sharing network resources like file and printer sharing.
- When you want to use the router as an additional access point on an existing network.
- When you need to disable the router functionalities to work with third party devices.
- When you need to solve Network Address Translation (NAT) issues. This happens when a modem-router encounters an IP Address conflict with Linksys routers or experiences a strict NAT setting which is not ideal for online gaming.
While the router is set to Bridge Mode, some of its features will be disabled. The router will not have the Dynamic Host Configuration Protocol (DHCP) server functionality, the built-in firewall and NAT features will be disabled.
Before configuring your router to Bridge Mode, make sure the following requirements are met:
- You have a Linksys Smart Wi-Fi Router.
- You have two (2) network cables: one (1) to connect from your computer to any of the Ethernet ports at the back of the Linksys router and the other to connect the modem-router (gateway) to the Internet port of the Linksys router.
- You have an active Internet connection with your existing modem-router (gateway).
NOTE: Contact your ISP for assistance on Internet connection issues when directly connected to the modem.
- You have set up your Linksys Smart Wi-Fi Router, otherwise click any of the links below for instructions:
Setting up the Linksys EA6500 using the Linksys Smart Wi-Fi Router Setup Wizard
Setting up the Linksys Smart Wi-Fi Router using the Smart Setup Wizard
Setting up your Linksys Smart Wi-Fi Router using an iPhone® or iPod touch®
QUICK TIP: Before setting up the router to Bridge Mode, it is recommended to create a backup file first so you can restore the previous settings in case the configuration fails. For steps on how to back up and restore the Linksys Smart Wi-Fi Router settings using the local access interface, click here.
To set up the router to Bridge Mode, follow the steps below.
Connect an Ethernet cable from your computer to any of the Ethernet ports (1-4) at the back of the Linksys router. Do not connect anything to the Internet port for now.
Plug the supplied power adapter to an electrical outlet and into the Linksys router.
IMPORTANT: Make sure that the router’s Power light is solid before proceeding to the next step.
Launch your web browser and enter the router's IP Address or “myrouter.local” in the Address bar then press [Enter] on your keyboard.
NOTE: 192.168.1.1 is the router's default IP Address.
Enter the router's administrative password (default is admin) and click Log in.
QUICK TIP: If you have changed your router's admin password, enter the new password instead. In case you have forgotten your router password, click here to learn how to retrieve it.
Click the Internet Settings tab and click Edit.
From the drop-down menu, set the Connection Type to Bridge Mode.
Set the IP Address configuration for your router.
- Obtain an IPv4 address automatically – Select this if you want the modem-router (gateway) to provide the IP Address for your Linksys router.
- Specify an IPv4 address – Select this if you want to use a fixed IP Address for your Linksys router. To do so, enter the information for your Internet IPv4 address, Subnet mask, Default gateway, and DNS entries. This information is provided by your ISP and can be found on the modem-router (gateway) settings.
Click the button to save the changes.
On the Warning screen, click Yes.
Your router is now set to Bridge Mode.
Connect the modem-router (gateway) to the Internet Port of the Linksys router.
Once your router detects that there is Internet access, it will give you an Internet Restored prompt. Click Yes.
IMPORTANT: If you do not have Internet access after connecting the modem-router (gateway) to the Linksys router, powercycle the router for 30 seconds and reboot your computer.
You will be redirected to the Linksys Smart Wi-Fi Sign In page. If you already created a Linksys cloud account, enter your login credentials in the Email Address and Password fields and click Log in.
QUICK TIP: If you do not have a Linksys cloud account, click on Create Account. For instructions on how to create, activate, and associate a Linksys cloud account, click here.
IMPORTANT: Please note that accessing the interface of your Linksys router in Bridge Mode can only be done locally using either wired or wireless connection.
Once you have logged back in to your router, you can now proceed with securing your wireless network. For instructions, click here.
Setting the router to Bridge Mode will disable its Guest Access feature. When cascading routers, specifically using LAN to LAN connection, setting the second router to Bridge Mode would not allow access for guests. However, Guest Access is still permissible if the type of connection is LAN to WAN. For more information about cascading routers, click here.
Utilizing your network
After setting your router to Bridge Mode, you can configure your Windows® devices for File and Printer Sharing. This is a feature that allows all computers in the network to send print jobs to a printer or share files to other computers. For more information about this feature, click here.
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.