text.skipToContent text.skipToNavigation

Physical Overview of WGA600N

The WGA600N is a Dual-Band Wireless-N Gaming Adapter where gives wireless connection capabilities to any wired Ethernet-equipped game console. The device comes various LEDs and ports which are further described below.

Front Panel
 

Image


The Security Button automatically configures the adapter's wireless security, WPS (Wi-Fi Protected Setup) for your wireless network.

The Power LED alternates between orange and green during booting, diagnostics, system self-test and firmware upgrades. The Power LED will stay green once the Adapter is powered on and ready.

The Ethernet LED lights up when the Adapter is connected to a device through the Ethernet port. If the LED is flashing, the Adapter is sending or receiving data over that port.

The Wireless LED lights up when there is a wireless connection. If the LED is flashing, the Adapter is sending or receiving data over the wireless network.

The Security LED Image indicates when wireless security is enabled.

Back Panel
 

Image


The Ethernet port connects the Adapter to your gaming console, wired PC or other Ethernet network device.

The Reset button Image can be used to reboot the Adapter or to restore the Adapter's factory default settings. Using an object with a small tip, such as pen, press and hold the button until you feel it click.

The Power port is where you will connect the power adapter.


 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT