RE2000 product features and specifications
This article will show you the product features and specifications of the Linksys Selectable Dual-Band Wireless-N Extender, RE2000.
|Wireless Standards||IEEE 802.11 a/n/g/b|
|Maximum Distance/Range||300 m / 1000 ft*|
|Ports||Fast Ethernet, C7 connector for localized AC cable or clip|
|Buttons||Reset, Wi-Fi Protected Setup™ (WPS)|
|LEDs||Power/Wi-Fi Protected Setup™, Ethernet (link, activity)|
|Antenna Gain||13.8 dBi|
|Security Features||Wi-Fi Protected Access™ 2 (WPA2), Wi-Fi Protected Access™ (WPA), WEP|
|Security Key||Up to 128-bit encryption|
*The maximum distance or range that the range extender has depends on the technology that the device is using. Since the RE2000 supports Wireless-N, -G, and -B standards, its maximum range is similar to the one used by the most recent Wireless-N standard which is 300 m or 1000 ft.
NOTE: The maximum distance/range is only achieved if the device is set up in an environment that is devoid of any interference. The router being used with the extender can also affect the range that it can provide. For example, using RE2000 with a Wireless–G router would make the extender operate on a Wireless-G speed.
|Transmitted Power||802.11n (40 MHz) 15.5 ± 1.5 dBm @ CH6, mcs15|
802.11n (20 MHz) 17.0 ± 1.5 dBm @ CH6, mcs0-4, mcs8-12
802.11n (20 MHz) 16.0 ± 1.5 dBm @ CH6, mcs5-7, mcs13-15
802.11g 18.0 ± 1.5 dBm
802.11b 18.0 ± 1.5 dBm
|Receive Sensitivity||-91 dBm @ 1 Mbps|
-87 dBm @ 11 Mbps
-71 dBm @ 54 Mbps
-66 dBm @ 270 Mbps
|Dimensions||4.92” x 3.62” x 1.29”|
(125 x 92 x 33 mm)
|Weight||5.4 oz (152 g)|
|Power||Internal AC/DC power supply 100-240 V, 50/60 Hz, 0.5 A|
|Operating Temperature||32 to 104°F (0 to 40°C)|
|Storage Temperature||-4 to 140°F (-20 to 60°C)|
|Operating Humidity||10 to 80% Noncondensing|
|Storage Humidity||5 to 90% Noncondensing|
NOTE: Specifications are subject to change without notice.
Getting to know the Linksys RE2000