WRT54GS Frequently Asked Questions
TABLE OF CONTENTS
1. What is WRT54GS?
2. What are the IP address, Username and Password to login to the web-based setup page?
3. How can I reset the WRT54GS to factory defaults?
4. What antenna connector type can be attached to the WRT54GS?
5. What is the Power Supply Unit (PSU) for WRT54GS?
6. How far should the wireless signal reach?
7. Where can I find the model and version of my Linksys router?
1. What VPN Passthroughs does the WRT54GS support?
2. Does the WRT54GS have a Backup and Restore feature?
3. What Internet connection types does the WRT54GS support?
4. What is Wi-Fi Multimedia (WMM)?
5. What is Secure Easy Setup™ (SES)?
6. How does Secure Easy Setup™ (SES) work?
7. Will I be able to setup more than one (1) wireless computer using Secure Easy Setup™ (SES)?
8. What is AP Isolation and what is used for?
9. What DDNS providers does the WRT54GS support?
10. Is it possible to wirelessly connect my TV or other wireless devices to a computer that is connected to my router?
1. How do I connect a wireless computer running on Windows Vista using WLAN Autoconfig?
2. How do I reconfigure the wireless security settings of my router?
3. What can I do if I cannot get online simultaneously on multiple devices?
FIRMWARE UPGRADE METHOD
The WRT54GS Wireless-G Broadband Router with SpeedBooster™ is a three-in-one device. It acts as a wireless access point which lets you connect your wireless computers and devices to it without using wires, it serves as a built-in 4-port full-duplex 10/100 switch to connect your wired devices to it using Ethernet cables, and it also serves as your network's DHCP server with a powerful firewall to protect your computers against intruders and most known Internet attacks. The router function ties it all together, letting your whole network share high-speed Cable or DSL Internet connection. To learn more about the WRT54GS router’s features, click here.
The default IP address of your device is 192.168.1.1. To log in, enter “admin” on the password field and leave the username blank.
Press and hold the Reset button at the router’s back panel for 30 seconds then release. Alternatively, use the web-based setup page, go to Administration tab > Factory Defaults sub-tab and click the Restore Factory Defaults button.
The HGA7T High Gain Antenna Kit for TNC Connectors can be attached to the WRT54GS.
The PSU for WRT54GS is 12 V 0.5 A.
The maximum distance for Wireless-G routers is 100 meters or 328 feet.
The model and version number is printed on the Linksys sticker at the bottom of the router. Aside from the device itself, the serial number of your Linksys device is also printed on the box.
- Power - The Power LED flashes green when booting up. It lights up green when the router is ready for use.
- DMZ - Lights up green when Demilitarized Zone (DMZ) is enabled.
- WLAN - The Wireless LED lights up green when there is a wireless connection. The LED flashes when the router is actively sending or receiving data over the wireless network.
- Ethernet (1, 2, 3, 4) - The Ethernet LED lights up green when there is a wired connection. The LED flashes when the router is actively sending or receiving data over the Ethernet port.
- Internet - The Internet LED lights up green when there is a wired connection with the Cable or Digital Subscriber Line (DSL) modem. The LED flashes when the router is actively sending or receiving data over the Internet port.
- Brand logo (SES) - Your router's brand logo LED lights up an off-white color when Secure Easy Setup (SES) is inactive. It flashes white when the router is waiting for incoming SES connections and lights up white when the SES is active.
The warranty period is dependent on the country of purchase. For more information about your device's warranty, click here.
The WRT54GS supports seven (7) wireless security types including WEP, WPA Personal, WPA Enterprise, WPA2 Personal, WPA2 Enterprise, and RADIUS. The router also supports Wireless MAC Filtering.
Yes, you may set up Access Restrictions through the router’s web-based setup page. To learn how to do this, click here.
The WRT54GS supports IPSec Passthrough, PPTP Passthrough, and L2TP Passthrough.
Yes. For instructions on how to do this, click here.
- Automatic IP Configuration - DHCP
- Static IP
- Telstra Cable
Wi-Fi Multimedia™ (WMM) is also known as Wireless QoS. This is used to throttle bandwidth to specific wireless computers connected to the WRT54GS.
It's an easy way to set up wireless settings on both the router and wireless adapter.
When the Brand logo button on the router is pushed, it will automatically generate a Wireless Network Name or SSID, for example, Linksys_SES_4723, and WPA PSK. Then, the Secure Easy Setup™ button in the WLAN software and/or setup CD should be enabled too. Once both buttons are pushed, a profile will automatically be created in the WLAN containing the unique SSID and WPA PSK. At that point, a secure wireless connection is established.
Yes, as long as the other computer’s wireless adapter supports Secure Easy Setup™ (SES). The SSID and WPA key won’t change each time you press it as long as the router’s Reset button doesn't get pushed.
AP Isolation creates a separate virtual network for your wireless network. When this feature is enabled, each of your wireless clients will be in its own virtual network and will not be able to communicate with each other. You may want to utilize this feature if you have many guests that frequent your wireless network.
The supported providers are DynDNS.org and TZO.
No. A wireless TV or other wireless devices can be connected directly to the router but not through the computer that is connected to it.
To know how to connect your computer running on Windows Vista to the Internet, click here.
If you want to know how to change or reset the network password or security key of your wireless router through the web-based setup page, click here for instructions.
Most issues can be resolved by doing a powercycle. To do this, unplug the power cord from your router and wait for 10 seconds before plugging it back in.
In case the powercycle doesn’t work, you need to ensure that your computer is properly connected to your router’s Ethernet port. You can do this by checking whether the corresponding LED on the router where your computer is connected to is lit.
When using wireless devices, you also need to check that the computers are properly connected to your wireless network. To know more about connecting wireless computers to your network, click here. To know more on how to resolve intermittent wireless signal, click here.
If you're still having connectivity problems for both wired and wireless devices, you may need to download and upgrade the router’s firmware. To learn how to do this, click here.
FIRMWARE UPGRADE METHOD
Open any web browser (Internet Explorer or Safari). Enter your router’s IP address in the Address bar, then press [Enter]. The default IP address of Linksys routers is 192.168.1.1.
Enter “admin” in the Password field then leave the User name blank. If you have set up a User name and Password for your Linksys router before, enter your personalized credentials instead.
Click on the Administration tab > Firmware Upgrade sub-tab.
Click the Browse button to go to the drive where the firmware upgrade file on your computer is located, then click Upgrade.
IMPORTANT: Do not unplug, reset or powercycle the router while it is performing a firmware upgrading.
No. Upgrade your router's firmware using only the one assigned to its particular hardware version.