text.skipToContent text.skipToNavigation

Setting up TZO DDNS Service on a Linksys Camera

The Dynamic Domain Name System (DDNS) feature on Linksys Home Monitoring Cameras is useful especially if your Internet IP address from your Internet Service Provider (ISP) is Dynamic Host Configuration Protocol (DHCP). To easily identify the current IP address assigned by your ISP, you can sign up for a free 1-year DDNS service from TZO.

NOTE: This feature will only be useful if you want to access your camera remotely.

Accessing the camera’s web-based setup page
Signing Up to TZO Dynamic DNS
Setting Up DDNS on the Camera

Follow the instructions below to setup your camera with DDNS service:

NOTE: It is important to do each step carefully to prevent encountering an error.

Accessing the camera’s web-based setup page

Step 1:
Access the web-based setup page of your camera. For instructions, click here.

NOTE: If you don't know your camera's internal IP address, launch the Camera Utility and click Setup. All cameras detected in your home network will be listed including the IP address information. If you are using WVC54GC, your default IP address is192.168.1.115.

Step 2:
Click on Advanced Configuration.

Step 3:
Enter your User name and Password.

NOTE: The default User name and Password is “admin”. If you have changed the User name and Password when you ran the Setup Wizard, enter them to their corresponding fields similar to the image shown above.

Step 4:
Click on Options then check the Enable DDNS box. To sign up for free 1 year TZO DDNS service, click Web Site.


Signing up to TZO Dynamic DNS

After clicking on Web Site, a new window will be opened. Follow the steps below to sign up for free 1 year TZO service:

Step 1:
Select Linksys Camera then click Next.

Step 2:
Choose your Linksys Camera then click Next.

Step 3:
Select I would like to try TZO DNS for 1 Year for FREE! > Next.

NOTE: TZO trial period varies on the Linksys camera you have. In this example, WVC54GCA has 1 year TZO trial.

Step 4:
Enter the Serial Number of your camera then click Next.

NOTE: Your camera should be in warranty to proceed with the next step.

Step 5:
Enter your desired Domain Name.

NOTE: The Domain Name you enter above will be used to access your camera using the web browser.

Step 6:
In the next window, you will be asked for your email address in order to send you the account information. Enter your email address and click Next.

Now that you have signed up with your TZO DDNS account, you should check your email for the information.

Setting Up DDNS on the Camera

To access your camera utility, repeat Steps 1-3 above and then proceed with the instructions below:


Step 1:
Enter the following TZO Account information into the Camera’s DDNS section:

NOTE: These can be found in the email from TZO.

• Domain Name
• E-Mail Address
• TZO Key

NOTE: Make sure you enter the information exactly as shown in the email.

Step 2:
Click on Apply.

Este artigo foi útil?

Perguntas adicionais de suporte?

Verificar novamente