- Installing WVC80N using the web-based setup page
NOTE: Before accessing the WVC80N’s web-based setup page, make sure that the camera is wired to one of the Ethernet ports on the router (1, 2, 3 or 4) and is powered ON.
Installing WVC80N using the web-based setup page
Access the video camera’s web-based setup page. For instructions, click here.
NOTE: To access the video camera’s web-based setup page using a Mac® computer, click here for instructions.
Once the video camera’s setup page appears, click Setup.
Scroll down to the Wireless Settings section and enter the wireless network’s settings. The settings should match the wireless network settings on your router.
Look for the SSID field and enter the wireless network’s SSID, then on the Network Type drop down menu, select Infrastructure.
If wireless security is disabled in your router, click Disable then click Apply. If wireless security is enabled in your router, click Enable then click Edit Security Settings.
If the wireless security in your router has WEP enabled, set Security Mode to WEP. For WEP Encryption, select the appropriate WEP level the wireless network is using and enter the WEP key on the Key 1 field.
If the wireless security in your router is using WPA, look for Security Mode and select either WPA Personal or WPA2 Personal then enter the WPA key on the Shared Key field.
Your Linksys WVC80N Wireless-N IP Camera is now ready to use.
Este artigo foi útil?
Agradecemos a sua opinião.
Diga-nos o que podemos fazer para que este artigo seja mais útil.