Setting up the Linksys EA6350 v4

Setting up the Linksys EA6350 v4 R63 Dual-Band WiFi 5 Router is easy using the Smart setup wizard which comes with the router's firmware. 

Before you begin, make sure to perform the following steps:
  • Power OFF the modem.
  • If you are replacing your existing router, make sure to disconnect it and move it out of the way.
  • Prepare the Linksys default Wi-Fi name and password.  You can find the router’s default Wi-Fi name and password in the quick start guide or at the bottom of the router.  For the 2.4 GHz radio, the label will display Linksysxxxxx where the xxxxx represents the last five characters of the router’s serial number.  For the 5 GHz radio, the default Wi-Fi name is Linksysxxxxx_5GHz.  The router will broadcast the two names, you can select any of the two Wi-Fi’s, preferably the 5 GHz if you see it on your device.  The same password applies for both.
Follow the steps below to set up the Linksys EA6350 v4:
Step 1:
Power ON the modem.  Then, connect an ethernet cable from the modem to the internet port of the router.

Step 2:
Connect the power adapter to the router and turn it ON.

Step 3:
Wait until the light on the router is solid white.

Step 4:
Connect your computer to the router’s default Wi-Fi name.

Step 5:
Open a web browser and go to "".  Or, if you are unable to open the link, you can use “myrouter.local” or “” (the default IP address of the router).

Step 6: 
On the setup wizard screen, check the box beside I have read and accepted the License Terms for using this software.  You can also keep the check on the second box to report errors and diagnostics to Linksys, which is enabled by default.  Click on Next to continue.  

User-added image
If you need to bypass the setup wizard, click on the Manual configuration link at the bottom of the page.

Step 7:
The updates for the router are enabled by default.  You can always disable it after setting up the router.  Click on Next to continue.
User-added image
Step 8:
By default you can name your networks separately.  Enter the required information and then click on Next.  
User-added image
If you want to use one name for both Wi-Fi bands, you can click on Give all my Wi-Fi bands the same name.  Enter the required information and then click on Next.
User-added image

Step 9:
Once the router saves the settings, you will be prompted to connect to the new Wi-Fi. 
  User-added image
Enter the required information to connect to the new Wi-Fi and then go back to the setup wizard.
User-added image
Step 10:
Once connected to the new Wi-Fi, the wizard will prompt you to c
reate a router password and password hint to help you remember the password in the future.  Click on Next.
User-added image
Step 11:
Your router is set up!  You can print or write down the router settings.  Click on Next to continue.

User-added image
Step 12:
You can now create a Linksys server account to access the router remotely on your computer or mobile device through the Linksys app.  To learn how to create a Linksys server account, click here.  If you already have an account, click on Sign In.

Was this support article useful?

Additional Support Questions?
Search Again