Connecting a USB printer through the Linksys USB Control Center software (Windows®)

The instructions below will guide you on how to download and connect your USB printer to your network using a Windows® computer through the Linksys USB Control Center software.
NOTE:  The Linksys USB Control Center software is available to any Linksys Smart Wi-Fi Routers with USB port.

Before connecting the USB printer, make sure that your computer’s Operating System (OS) is compatible with the Linksys USB Control Center.  Refer to the list below:
Windows OS
Linksys USB Control Center
Version 2.1.0
Version 2.2.0
Windows 10
Windows 8
Windows 7
Windows Vista® SP1
Windows XP SP3
NOTE:  If you are using a Mac® computer, click here for instructions.
Step 1:
Access your Linksys Smart Wi-Fi Account.  For instructions, click here.

Step 2:

Click the Network Map or Device List Tool on your Linksys Smart Wi-Fi Account navigation menu. 
User-added image
 User-added image
Step 3:
On the upper right side, click the User-added image button.

Step 4:
Under the Select the type of device to add to your network page, click USB Printer.
User-added image
Step 5:
Connect your printer to the USB port of your router.
User-added image
Step 6:
Under the For Windows PC category, click the Click here link to download the free Linksys USB Control Center software.
User-added image
Step 7:
Click the Save File option then click OK.
User-added image
Step 8:
Locate and extract the downloaded Linksys USB Control Center installer.  Right-click the file then select the Extract to Setup\ option.
 User-added image
Step 9:
Once the extraction completes, select the folder with the correct version for your Windows operating system.
User-added image
NOTE:  The version 2.2.0 is used for Windows 7, Windows 8, and Windows 10.  The version 2.1.0 is used for Windows XP and Windows Vista. 

Step 10:
Double-click the Cosetup file to start the installation.
User-added image 
Step 11:
Click Run.
User-added image

Step 12:
Click the Next > button.

User-added image 
IMPORTANT:  Make sure that you temporarily disable any firewall or security software that may prevent the installation from running.

Step 13:
Click Start.

 User-added image
Step 14:
Click the User-added image button then wait for the software to start the installation.

User-added image
Step 15:
When a prompt appears, click User-added image to proceed.

NOTE:  You will be receiving a notification message that the Linksys USB Control Center software is being installed on your computer, wait for it to finish.

Step 16:
When the Control Center software has been installed window appears, click Finish.

NOTE:  If you left the Restart your computer now checkbox checked, your computer will restart.
 User-added image
Once the computer has finished restarting, open the Linksys USB Control Center software to install the printer so that it can communicate with your router and other devices in your network.
Your printer has a default name assigned to it by the manufacturer.  However, if you've renamed the printer to something like "Kitchen Printer", that name will appear instead.
NOTE:  If your printer name does not appear in the list of available printers when you try to print, you may need to install the printer driver (software) on your computer first and then add the printer again via the USB Control Center.
Related Articles:

How to connect wireless devices to your network using the Linksys Smart Wi-Fi Account
Connecting and configuration tips for your network printer

Was this support article useful?

Additional Support Questions?
Search Again