Getting to know the WRT54GL

This article will list down and discuss the different parts of the Linksys WRT54GL router.

Router’s front panel and LEDs
Router’s back panel
Basic features and specifications

Router’s front panel and LEDs

    Power LED – This lights up green when the device is powered ON.

    Demilitarized Zone (DMZ) LED –  When the DMZ feature is enabled, this LED will light up green.

   Wireless Local Area Network (WLAN) LED –  When a wireless connection is established, this LED will steadily light up.  Once it flashes, it means that the router is sending or receiving data across the network.

   Ethernet LED (1-4) – These numbered LEDs will light up green if an Ethernet cable is connected to any of the Ethernet ports found at the back of the device.

   Internet LED – This will light up green if your router is connected to a Cable or DSL modem.  Once it flashes, it means that the router is sending or receiving data across the network.

  Logo LED – This is the router’s SecureEasySetup (SES) button.  Take note of the following LED activities:

• When the LED lights up orange, it means that the router is powered ON and the SES feature is disabled.

• When the LED flashes white, it means that the SES is being set up.

• Once the router has acquired the wireless network name (SSID) and password, the LED will steadily light up white.
 

Router’s back panel

     Reset Button – Press this button for 30 seconds to restore your settings to default.

     Internet Port – This connects the router and the Cable/DSL modem.

     Ethernet Ports (1-4) – This is where you connect the Ethernet cable.

     Power Port – This is where you connect the supplied power adapter.


Basic Features and Specifications

•  SecureEasySetup (SES) for push button security
•  Complies with 802.11g and 802.11b (2.4 GHz) standards
•  Supports Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access 2 (WPA2) security modes
•  Enhanced Internet Security Management Functions including Internet Access Policies with Time Schedules
•  Supports Auto-Crossover/No Need for Crossover Cables (MDI/MDI-X)
•  Easy to manage and user-friendly web-based setup page. 

Specifications
 Dimensions7.32” x 1.89” x 6.06” (186 x 48 x 154 mm) 
 Weight13.8 oz (319 g) 
Power External, 12V DC, 05.A
 Frequency2.4 GHz 
Certifications  FCC, ICES-003, CE. Wi-Fi (802.11b/g), WPA2, WMM
Operating Temperature 32-104°F (0-40°C) 
Storage Temperature -4 to 158°F (-20 to 70°C)
Operating Humidity 10 to 85%, Noncondensing 
 Storage Humidity5 to 90%, Noncondensing 

 

 

 

Was this support article useful?

Additional Support Questions?
Search Again