text.skipToContent text.skipToNavigation

Setting up the Linksys 1080p 3MP Indoor/Outdoor 360 Mini-Dome Camera, LCAM0336OD

The Linksys 1080p 3MP Indoor/Outdoor 360 Mini-Dome Camera, LCAM0336OD has a distortion-free display and the ability to plunge and navigate into immersive videos from cameras equipped with Panomorph lenses.  It offers a wide range of features which include:
  • Capturing a bird’s eye view of an entire area
  • Digital panning
  • Seeing multiple virtual camera views from the same video source
  • Panomorphing lens
  • WDR Support- Wide Dynamic Range
  • Built in Microphone
  • PoE
There are two (2) setups that you need to perform to install the mini-dome camera:

Hardware installation
Software installation

Hardware installation

Make sure that the following items are included in the Linksys LCAM0336OD package:
  • Network camera
  • Mounting adapter
  • Location sticker, screws and anchors
  • Moisture-absorbing dry bag, double-sided tape
  • Allen Key T10
  • CD with Documents and Video Surveillance Manager Software
NOTE:  Linksys is not responsible for damages incurred by improper wall or ceiling mounting.
 
Step 1:
Use the enclosed Allen wrench to detach the cover from the camera.


IMPORTANT:  When removing the cover, please be aware of the microphone line.
 
Step 2:
Insert your Micro SD/SDHC card into the SD card slot.  The maximum card size supported is 32 GB. (Not Included)

NOTE:  The mini-dome camera does not come with a free SD/SDHC card.  It must be purchased separately.

Step 3:
Place the moisture-absorbing dry pack inside the camera and secure it with double-sided tape.
 
Step 4:
Attach the location sticker to your desired spot in the house or office.   The best place to mount the camera is on a ceiling stud.  
 
Step 5:
Drill through the center of the three (3) location holes on the sticker and hammer the three (3) plastic anchors into the three (3) location holes.
 
Step 6:
Hold the camera against the wall, lining up screw slots on camera mount with the plastic anchors.

Step 7:
Insert the screws and tighten.  The camera must be installed securely and properly.  The camera might fall and get damaged if mounted on a soft material and/or not tightly secured.
 
QUICK TIP:  If you are using the mounting adapter, use three (3) longer screws.  If you are not using the mounting adapter, use the three (3) shorter screws.

Step 8:
Connect the RJ45 Ethernet cable.  For outdoor installation, be sure to connect an RJ45 Ethernet cable with a waterproof Ethernet connector.
 
NOTE:  The camera is Power over Ethernet (PoE) compliant (802.3af).  If you don’t have a PoE switch or injector, you will need a DC12V power supply, which is not included in the package.

Step 9:
Connect your speaker cable to an audio line-out connector (optional).

Step 10:
For outdoor installation, cover the connections with electrical tape.
 
Step 11:
Put the dome cover back on the camera and secure it using the Allen wrench.

WARNING:  The lens has been setup to have a clear view of objects up to three (3) meters (10 ft.) away from the camera.  Linksys is not responsible for any issues caused by the user’s adjustment to the lens.

After you have successfully installed the camera to your desired spot, you can now install the Video Surveillance Manager (PC-NVR) Software that comes with the device for easy configuration and management.

Software installation

The following requirements must be met to successfully install the Video Surveillance Manager Software:
  • Microsoft Windows 7 or 8 (32-bit or 64-bit)
  • Intel® Dual Core CPU 2.0 GHz
  • Dedicated Video Card with 256 MB RAM
  • 4 GB RAM
  • Gigabit LAN Port
  • Sound Card required for audio function
  • Monitor - 1024 x 768 pixels or more, 24-bit true color
  • Microsoft Internet Explorer 9 or later
Step 1:
Insert the Setup CD into your computer’s CD-ROM drive.

Step 2:
If you do not see the Welcome Screen, click Start > Computer then double-click the CD drive and the Setup icon.

Step 3:
Follow the on-screen instructions.

NOTE:  You may be prompted to install Windows Installerv4.5, .Net Framework v3.5, Microsoft SQL 2008 Express.  If these versions are not installed on your system, the program will install them for you automatically.
 

 
Step 4:
Once installed, you will be prompted for a Username and Password.  The default is admin for both.  This password is different from the camera's password.  The PC-NVR has its own separate password to manage the utility.  Click OK.
 
NOTE:  If you forgot your password, you may reinstall the software; but, as you uninstall it, uncheck all the boxes to avoid deleting any of the media files.
 
The Video Surveillance Manager Software will display the LiveView screen of the utility.  
 
IMPORTANT:  Camera image or video feeds will not appear on the grid until you add them in the Search area.  To add your Linksys cameras, click here.


Congratulations!  Your mini-dome camera is now ready for use.  If you need more help or information about the camera, visit the Linksys Small Business Support.


Related Articles:

Setting up the Linksys 1080p 3MP Outdoor Night Vision Bullet Camera, LCAB03VLNOD
Setting up the Linksys 1080p 3MP Outdoor Night Vision Dome Camera, LCAD03VLNOD
Setting up the Linksys 1080p 3MP Indoor Night Vision Dome Camera, LCAD03FLN

Hat Ihnen dieser Support-Artikel geholfen?

Haben Sie noch Fragen an den Support?

Erneut suchen

SUPPORT KONTAKTIEREN