text.skipToContent text.skipToNavigation

Resetting the LNR0208C 2-Bay Network Video Recorder to factory default settings via the web user interface

Follow the steps below on how to reset the LNR0208C to factory default settings via the web user interface:
 
Step 1:
Access the web user interface of the LNR0208C by entering the device’s IP address on a web browser.
 
NOTE:  The default IP address of the LNR0208C is 192.168.1.253 if it is not connected to a DHCP server.  Otherwise, use the IP address assigned by the DHCP server.
 
Step 2:
Enter the device’s username and password then click Log in.
 
 
Step 3:
Click the  icon.
 
Step 4:
Click Management then click Back Up and Restore.
 
 
Step 5:
To reset the LNR0208C, tick the Reset to Factory Default option.  Make sure that you have saved the configured settings or certain that you want to reset the device.  It will not prompt for a confirmation if you want to do a reset once you proceed.  Click Apply.
 
NOTE:  The factory default IP address of the LNR0208C is 192.168.1.253.
 
 
You have now successfully reset the LNR0208C 2-Bay Network Video Recorder to factory defaults.

Hat Ihnen dieser Support-Artikel geholfen?

Haben Sie noch Fragen an den Support?

Erneut suchen

SUPPORT KONTAKTIEREN