text.skipToContent text.skipToNavigation

Linksys High Power PoE Injector, LACPI30 specifications

The Linksys High Power PoE Injector, LACPI30 offers a quick and easy setup with Plug-n-Play installation, provides Power over Ethernet (PoE) capabilities to a Provider Edge (PE) device and to your non PoE network by simply connecting it to your existing network.  It is easy to configure and operate allowing you a fast and convenient access to your files. 
 
It also reduces the wiring cost of AC power by using a standard CAT5 cable to carry both power and data to Power over Ethernet devices such as cameras and access points, up to 100 meters away.

The table below lists the specifications of the Linksys High Power PoE Injector, LACPI30.
 
ModelLACPI30
Ports * One connector (Data port) for connecting to the passive hub or switch.
 * One connector (PoE/Data port) for connecting to
the PoE enabled device.
Standard IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
 IEEE2.3ab 1000Base-T, IEEE802.3af, IEEE802.3at 
LED Definition PoE :  Green LED
 System:  Blue LED
Dimensions 154 x 73 x 36 mm
Unit Weight 393.5 g
Power 100 ~ 240 V AC, 50 ~ 60 Hz (2A max)
Certificate FCC, CE Class A RoHS compliant
Temperature Operating:  0 °C to 40°C (32 °F to 104 °F)
 Non-operating:  40 °C to 70°C (-40 °F to 158 °F)
Humidity Operating:  10% to 90% RH, non-condensing
 Non-operating:  5% to 90% RH, non-condensing


Related Articles:
 
Getting to know the Linksys High Power PoE Injector, LACPI30
Connecting the Linksys High Power PoE Injector, LACPI30 on devices

Hat Ihnen dieser Support-Artikel geholfen?

Haben Sie noch Fragen an den Support?

Erneut suchen

SUPPORT KONTAKTIEREN