text.skipToContent text.skipToNavigation

Getting to know the Linksys High Power PoE Injector, LACPI30

The Linksys High Power PoE Injector, LACPI30 offers a quick and easy setup with Plug-n-Play installation, provides Power over Ethernet (PoE) capabilities to a Provider Edge (PE) device and to your non-PoE network by simply connecting it to your existing network.  It is easy to configure and operate allowing you a fast and convenient access to your files. 
 
It also reduces the wiring cost of AC power by using a standard CAT5 cable to carry both power and data to Power over Ethernet devices such as cameras and access points, up to 100 meters away.
 

Product Overview

Front
 

 PoE LED (Green) - Indicates the PoE/DATA port delivering power.
  • OFF - The PoE/DATA port is not delivering power.
  • Solid Green - The PoE port is delivering power.
 System LED (Blue) - The LED lights up and stays solid when the switch is powered ON.
 
 PoE/DATA port - This port supports 10/100/1000 base Ethernet and can transmit power and data at the same time or either. 
 
 DATA port - This port supports 10/100/1000 base Ethernet and ONLY transmits data. 
 
Back
 

Power Socket - AC power in, to connect the power cord to a power source.
 
Features
  • Convenient access to Power
Supplies power to PoE Wireless Access Points, IP Cameras and other PoE Powered Devices (PDs) through the Ethernet cable.
  • Speed and power performance
Offers Gigabit speeds with IEEE 802.3at (PoE+), which can provide power for up to 30 Watts.
  • Plug & Play Installation
Quick and easy set up - no software required.

Requirements
  • One Gigabit  Data Port - to connect to a  switch  or hub
  • One  Gigabit with PoE port  - To connect to a Powered Device (PD)
  • Internal Power supply - AC power 100-240 V AC at 50-60 Hz
  • Indoor usage only
  • The minimum power cord length is five (5) feet
Performance

All the ports must provide full line rate and forwarding rate of 64 B frames at 1.488 Mpps for 1000 M port, 0.1488 Mpps for 100 M and 0.01488 Mpps for 10 M port.
 
Enclosure Type

The Injector is built with a metal chassis.

Wall Mounting
 
The Injector is built for Wall-mounting purposes.

Warranty
 
The PoE Injector has two (2) years limited warranty.

Package Contents
  • LACPI30 Gigabit High Power POE Injector
  • Power cord
  • Quick Installation Guide
  • Wall Mount Kits
  • 4x Foot pads 


Related Articles:

Connecting the Linksys High Power PoE Injector, LACPI30 on devices
Linksys High Power PoE Injector, LACPI30 specifications

Hat Ihnen dieser Support-Artikel geholfen?

Haben Sie noch Fragen an den Support?

Erneut suchen

SUPPORT KONTAKTIEREN