text.skipToContent text.skipToNavigation

Downloading and upgrading the Linksys Small Business camera’s firmware

Linksys recommends that when upgrading the camera's firmware, use a computer within the camera's local network.  If you attempt to upgrade the camera's firmware from a remote location (i.e. using a computer outside of the camera's local network), the upgrade may fail.

NOTE:  When you upgrade the camera's firmware, you may lose the settings you have saved previously.
 
Downloading the Firmware
Upgrading the Firmware
 
Downloading the Firmware
           
Step 1:
Click on the model number of your camera below to download its firmware:
 
LCAD03FLN
LCAD03VLNOD
LCAM0336OD
LCAB03VLNOD

QUICK TIP:  If you don’t know the model number of your camera, click on the How do I find my model number? link.  Make sure to take note of the hardware version beside your model number.
           
Step 2:

Click the hardware version of your device.
 
NOTE:  Select the appropriate hardware version for your camera.  The hardware version can be seen beside the model number of your camera.
 
User-added image

Step 3:
Click Download under Firmware to download the latest firmware.
 
User-added image

NOTE:  You will be prompted with the End User License Agreement, click AGREE.
 
User-added image

NOTE:  The file size differs for each device.  If you are using Windows XP Service Pack 2 (SP2) and Internet Explorer, you may see a Pop-up blocked message in your browser’sInformation Bar.  If so, click the bar and select Temporarily Allow Pop-ups then click Download again. 
           
Step 4:

Click Save in the File Download dialog box that appears.  Look for the Save As dialog box, choose a location for the file like the Desktop and click Save.  When the download is complete, click Close, if prompted.
 
NOTE:  Be sure to remember the file name and where you saved it.
 
Upgrading the Firmware
 
Step 1:
Access your camera’s web-based setup page.  To learn how, click here.
 
Step 2:
Click the Configuration tab.
 
User-added image

Step 3:
Scroll down to the Maintenance section in the left navigation and click Firmware Upgrade.
 
User-added image

Step 4:
Click Choose File and select the camera’s downloaded firmware. 
 
User-added image

Step 5:
Click Upgrade.  A prompt will then ask you for confirmation to upgrade the firmware, click OK.
 
IMPORTANT:  DO NOT unplug the Ethernet cable or turn OFF the device during firmware upgrade.  

Your Linksys Small Business camera should now be successfully updated.

Hat Ihnen dieser Support-Artikel geholfen?

Haben Sie noch Fragen an den Support?

Erneut suchen

SUPPORT KONTAKTIEREN