Was getan werden muss wenn die LED des primären Node stetig rot leuchtet und Ihre Internetverbindung nicht funktioniert?
Was getan werden muss wenn die LED des primären Node stetig rot leuchtet und Ihre Internetverbindung nicht funktioniert?
Diesen Artikel weiterleiten:
Szenario:
Ich habe einen primären Node erfolgreich eingerichtet und mein Velop-Netzwerk arbeitet mit einer aktiven Internetverbindung. Nachdem ich aber die Netzwerk-Geräte neu arrangiert und das Modem wieder mit dem Node verbunden habe, funktioniert mein Internet nicht mehr und bei meinem primären Node leuchtet ein ständiges rotes LED anstelle eines blaues.
Lösung:
Mit der aktuellen Velop-Firmware wurde die automatische WAN-Porterkennung auf dem primären Node nach der Einrichtung deaktiviert. Wenn Sie z. B. einen primären Node mit einer aktiven Internetverbindung einrichten, wird der Ethernet-Port, den Sie für die Einrichtung verwenden (der Port des Node, an dem Sie Ihr Modem anschließen), zu einem festen WAN-Port und Ihr anderer Port zu einem festen LAN-Port. Im Falle, dass Sie das Modem aus Versehen an den anderen Port (der jetzt ein fester LAN-Port ist) anschließen, geht der primäre Node nicht online und ein ständiges rotes LED leuchtet auf.
Um dieses Problem zu beheben, schließen Sie das Modem an den anderen Ethernet-Port an und warten Sie, bis die LED des Nodes fest blau leuchtet. Wenn das Internet danach immer noch nicht funktioniert, starten Sie das Modem neu und starten Sie anschließend Ihren Velop in der richtigen Reihenfolge neu.
Hat Ihnen dieser Support-Artikel geholfen?
Wir danken Ihnen für Ihr Feedback.
Feedback
Bitte teilen Sie uns mit, wie wir diesen Artikel verbessern können.
* Required
Terms and Conditions for Linksys Cloud Manger 2.0 Migration
v0.1
By clicking the CONFIRM button I accept the Terms and Conditions related to the migration from Linksys Cloud
Manager 1.0 (LCM1) accessible via www.business.linksys.com to Linksys Cloud Manager 2.0 (LCM2) accessible via www.cloudmanager.linksys.com for all
devices purchased with the LCM1 firmware including LAPAC1200C, LAPAC1750C, LAPAC2600C and all regional
variations. Migrating from LCM1 to LCM2 provides for new functionality, but also changes and eliminates
other features. Those that are comfortable with the functionality provided in LCM1 do not have to migrate
but should know that Linksys will not be developing new functionality based on the LCM1 platform. Details of
the changes are outlined below. Please read carefully before initiating firmware migration.
Important facts to be aware of before migrating:
Once Access Points are upgraded with the new LCM2 firmware, these Access Points cannot revert
back to LCM1 firmware or be used with the LCM1 platform.
The firmware update is required for the Access Points to work with LCM2. Please make sure you are
comfortable with the feature changes before migrating over.
Existing LCM1 users will need to create new accounts in LCM2 in order to use it. All LCM1 account
information, including user profiles and network settings, will not be transferred to LCM2.
Linksys will continue to operate the LCM1 platform for the duration of the 5 year term offered,
then end of life the service. Once Access Points are upgraded, this 5-year cloud license for
LCM1 is replaced with the new license terms for LCM2.
Access Points upgraded to LCM2 firmware will have access to LCM2 for the lifetime of the product.
The migration to LCM2 brings new improvements over LCM1 which are listed here (Link to marketing document),
but also changes and eliminates some functionality currently available in LCM1:
No Stand Alone Option
The AP will not provide the capability to be configured and managed as a stand-alone device (with
exception of configuring connection parameters, i.e. IP address, subnet mask, gateway, VLAN).
All management features will now be cloud based. Once configured, the AP can continue operating
without a cloud connection, but a cloud connection will be required to make configuration
changes.
No Historic Data
Data usage statistics of clients and APs will be real-time only – i.e., populating for the
duration of the active cloud session. No historical statistics will be available, e.g. past 7
days, last 24 hours with the exception of online/offline status for devices.
Rogue AP Detection, Block Clients, Band Steering
Not included in LCM2 launch version. To be provided in future releases.
For any technical issues, please consult our online Linksys Cloud
Manager 1.0 to 2.0 Migration Guide or contact us at https://www.linksys.com/support. For North American phone support, call our
dedicated Business Technical Support line Monday-Friday, 5am-11pm PST at: +1 (877) 855-6899. For all other
regions, go here
to see your support options or contact your local Linksys office for more information.