text.skipToContent text.skipToNavigation

Configuring the Wi-Fi password of the Wireless-G ethernet bridge

Wired Equivalent Privacy (WEP) is a 64-bit key with 10 hexadecimal digits or a 128-bit WEP key with 26 hexadecimal digits.  This encryption will prevent other users from connecting to your Wi-Fi using your WEP key.  It will also protect your wireless transmissions / communications from being accessed or received by other users.

To set up WEP Wireless Security on your Wireless-G ethernet bridge, follow the steps below.

Step 1:
Access the Wireless-G ethernet bridge web-based setup page.  If you are using a Windows®, click hereFor Mac®, click here.

Step 2:
On the SSID field, enter your Wi-Fi name.

NOTE:  The Wi-Fi name of your Wireless-G ethernet bridge must be exactly the same as your router.  If you are uncertain with your Wi-Fi name, click the Site Survey button. 

Step 3:
On the Network Type, select Infrastructure.

Step 4:
Select Enable and click the Edit Security Settings button.

User-added image

Step 5:
A pop-up window will appear.  Click OK to continue.

User-added image

Step 6:
When the WEP Encryption window appears, select the same Default Transmit Key as your router.  In this example, 1 is selected.

Step 7:
Select the same WEP Encryption level either 64-Bit (10 hex digits) or 128-Bit (26 hex digits).  In this example, 64-Bit (10 hex digits) is selected.


User-added image

Step 8:
Enter your Wi-Fi WEP key based on the Default Transmit Key selected.

Step 9:
Click Apply

Step 10:
When the web-based setup page appears, click Site Survey.  When the Site Survey window appears, click Refresh and select your Wi-Fi name.


User-added image

You should now have configured the Wi-Fi password of your Wireless ethernet bridge.

To connect your wireless enabled device into the Wireless-G ethernet bridge, click



Was this support article useful?

Additional Support Questions?

Search Again