- Setting Up an ADSL Gateway with ADSL Internet
PPPoA or Point-to-Point Protocol over ATM (Asynchronous Transfer Mode) is a network protocol supported by the Linksys ADSL gateway. Most ADSL providers use PPPoA to establish Internet connection for end-users. In setting up a Linksys gateway with an ADSL connection, you need to enable PPPoA on the gateway's web-based setup page.
Before setting up your gateway with an ADSL connection, you need to do these steps:
Contact your Internet Service Provider (ISP) to ensure that you have active Internet service.
Connect the ADSL line and computer to the gateway. For instructions, click here.
Check the LEDs of the gateway. For instructions, click here.
NOTE: The images below may vary depending on the model of the device you are using.
For Encapsulation and select RFC 2364 PPPoA on the drop-down menu. Select the appropriate setting for Multiplexing. In the example below, VC is selected. Verify with your ISP which settings should be selected.
Set Autodetect to Disable and type the VCI and VPI range under Virtual Circuit.
NOTE: ISP’s provide VPI and VCI range for the Virtual Circuit. In this example, we used 0 for VPI and 38 for VCI.
NOTE: In case you were not provided Virtual Circuit information by your ISP, set Autodetect to Enable.
In the User Name and Password fields, enter the username and password provided by your ADSL ISP.
Click the Status tab.
Look for Login Status and check if it's Connected. If it’s connected, you should be able to access the Internet.
NOTE: If Login Status is Disconnected, click .
NOTE: For WAG160N, WAG120N and WAG320N, the Status page does not have a Login Status. The Internet should connect automatically.
To learn more about PPPoA and how to configure a gateway with PPPoE settings, click here.
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.