Using Site Survey on the Linksys RE7000, RE7310 and RE7350

The Site Survey feature of the Linksys RE7000, RE7310 and RE7350 displays all the WiFi within the range.  It helps you determine where to properly place your Linksys range extender between your WiFi router and the area with poor signal.
 
NOTE:  The Site Survey is ONLY available if your Linksys range extender is set up to work on Wireless Range Extender mode.
 
Follow the instructions below to learn how to use the Site Survey feature of your Linksys range extender.

 
Step 1:
Open a web browser to log in to the web-based setup page of your range extender.  For instructions, click here.
 
Step 2:
Under Wireless, click Site Survey.
 
User-added image

The Site Survey page will then be displayed.
 
User-added image
 
  • Select - clicking the radio button beside the WiFi name selects the SSID.
  • SSID - displays the name of available WiFi.
  • GHz - indicates the radio band of available WiFi.
  • Signal - displays the relative position of the available networks within range by indicating the power of the wireless signal received.

    QUICK TIP:  If a signal with no green bar is displayed, the Linksys range extender is located too far from the router.  For optimum performance, place your range extender near the router to keep the signal strength between 60% and 100%.

     
  • Security - displays the security type used by available networks.  If a network supports Wi-Fi Protected Setupâ„¢ (WPS), the WPS User-added image icon is also displayed.
  • Refresh - clicking the button refreshes the list of available WiFi.
  • Connect - clicking this button lets you connect to the selected SSID.
 
Step 3:
To associate the range extender to your access point or router, click the radio button that corresponds to your WiFi name then click Connect.

 
User-added image

Step 4:
Enter your WiFi password in the Passphrase field then click Connect.
 
NOTE:  The type of security information required in this screen should match your access point or router’s wireless security settings.  The WiFi password is also case-sensitive.

 
User-added image

Wait for the process to be completed.
 
User-added image

You should now have successfully configured your Linksys range extender with your WiFi.  You can proceed with connecting wireless computers and devices to get internet access.
 
QUICK TIP:  To know if your Linksys range extender is connected to the network, go to Status > WLAN Statistics.

 
User-added image

The Network Name (SSID) should display your router’s WiFi name.
 
User-added image  
 
QUICK TIP:  If you encounter any issues, a firmware upgrade may resolve them.  You can download the latest firmware of your Linksys range extender to ensure that you are using an updated version.  Search your model number from the
Linksys Support Site and download the file.

Was this support article useful?

Additional Support Questions?
Search Again