text.skipToContent text.skipToNavigation

Manually setting up the Linksys RE7350 and RE7000

This article will show you how to manually set up the Linksys RE7350 and RE7000. 
NOTE:  A Linksys RE7350 with factory default settings is used as an example here.

Step 1:
Connect a computer or a mobile device to the range extender's default SSID, which is Linksys Extender Setup – xxx.
QUICK TIP:  The xxx represents the last three characters of your range extender's MAC address.  The MAC address of your range extender is located on the label at the back of the device. 

Step 2:
Click the Manual Setup link to bypass the Setup Wizard.
User-added image
Step 3:
Enter the default Password which is admin.

User-added image
Step 4:
First, select the mode you need for your network.  For more information on the type of modes click here.
Step 5:
Configure your manual settings such as the WiFi name and password for both 2.4 GHz and 5 GHz bands on the Wireless > Basic Settings page.
NOTE:  The default mode when choosing Manual Setup is Wireless Range Extender mode.  When the Manual option has been clicked, you will see an orange bar across the page stating that upstream connection is not configured.  At this point you can go straight to the Site Survey page to select the upstream connection if you want to keep it in Wireless Range Extender mode, otherwise click on Change and select the Access Point mode and follow the instructions.
User-added image
QUICK TIP:  Click on the drop down arrow for User-added image and select your desired wireless options for the two bands.
User-added image
Step 6:
Click Save when you’re done to apply changes.

Was this support article useful?

Additional Support Questions?

Search Again