This article will guide you on how to set up a USB printer using the Linksys Connect software. Follow the steps below for instructions:
IMPORTANT: Make sure that the drivers for the printer are installed in each computer first before setting up the printer via the Linksys Connect software.

You have now successfully set up your USB printer using the Linksys Connect.
IMPORTANT: Make sure that the drivers for the printer are installed in each computer first before setting up the printer via the Linksys Connect software.
Step 1:
Launch the Linksys Connect software.
Step 2:
Go to Computers and other devices > Printer > USB Printer.
Step 3:
Follow on-screen instructions and download the Setup file to install the USB Utility.
Launch the Linksys Connect software.
Step 2:
Go to Computers and other devices > Printer > USB Printer.
Step 3:
Follow on-screen instructions and download the Setup file to install the USB Utility.
Step 4:
Extract the Setup file to install the USB Control Center utility.
Step 5:
Double click on Cosetup to install utility and follow the instructions.
Step 6:
Once your printer is detected, click Yes to auto-connect when sending a print job.
Extract the Setup file to install the USB Control Center utility.
Step 5:
Double click on Cosetup to install utility and follow the instructions.
Step 6:
Once your printer is detected, click Yes to auto-connect when sending a print job.
You have now successfully set up your USB printer using the Linksys Connect.