Configuring the Local User and Local Group on your LAPAC1200 or LAPAC1750

This article will show you how to configure the Local User and Local Group on your LAPAC1200 or LAPAC1750.  Follow the instructions below to learn more.
 
Step 1:
Open the web-based setup page of your LAPAC and select Captive Portal then click Local User from the drop-down navigation pane.
 
User-added image
 
Step 2:
Click Add and set up a username and password accordingly.  Then, create multiple accounts if necessary and click Save once done.
 
User-added image
 
Step 3:
Now click Local Group under Captive Portal.
 
NOTE:  One group can associate one (1) or multiple users.
 
User-added image
                  
Step 4:
Enter a Group Name if you have not created any group before then click Add.
 
User-added image
 
Step 5:
Select the Group Name from drop-down list and assign the right user accordingly.
 
User-added image
 
Step 6:
Click Portal Profiles.
 
User-added image
 
Step 7:
Associate the Group to the Portal Profiles and make sure Authentication is set to Local.
 
User-added image
 
Step 8:
Click Save to apply changes.
 
 
Related Article:
 
Configuring Captive Portal in LAPAC1200 or LAPAC1750

Was this support article useful?

Additional Support Questions?
Search Again