text.skipToContent text.skipToNavigation

Changing the LAN IP Address of the WGA54AG

There are cases when the network’s IP segment is different from the WAG54AG’s default IP segment.  In cases like this, the Game Adapter’s IP address needs to be changed so that the Game Adapter’s IP address is in the same IP segment as the network’s.

Changing the LAN IP Address of the WGA54AG

NOTE:  In this example, the network’s IP segment is 192.168.2.x.

Step 1:
Connect the Wireless Game Adapter to your router using an Ethernet cable. For instructions, click  here.

Step 2:
Access the Wireless A/G Game adapter’s web-based setup page.  For instructions, click  here.

Step 3:
When the Game adapter’s web-based setup page appears, click Advanced and look for IP Address.

Step 4:
Select Use the following IP settings and change the IP Address then make sure the gateway is the router’s IP address.

NOTE:  In this example, “192.168.2.250” was used for the IP Address and “192.168.2.1” was used for Gateway.

Step 5:

Click .

 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT