text.skipToContent text.skipToNavigation

Configuring the NMH300

The CD provided with the NMH300 has a Setup Wizard that configures the media hub with just a few clicks. To configure the media hub with the CD, follow the steps below:

Step 1:
Insert the Setup CD provided with the NMH300 into the CD-ROM.

NOTE:  If you do not have the NMH installation CD with you, click here for instructions on how to download and extract the NMH Setup Wizard.

Step 2:
Once the Setup Wizard window appears, click on Start Setup.

 

Image

Step 3:
On the Welcome screen, click Next to continue.

Image

Step 4:
On the End-User License Agreement page, click the I accept this agreement checkbox and click Next.

Image

Step 5:
The Setup Wizard displays a guide on setting up your Network Media Hub. Click Next to continue, after each step.

 

Image

Image

Image

Image

Image

                
Step 6:
When the media hub is detected, enter a password at the Set Device Password page and then click Next. The default password is “admin”.

NOTE:  You can create a new password by entering it on the Password field.
 

Image


Step 7:
On the Name your Device page, enter a Friendly name for the media hub.  Once you’re done, click Next.
 

Image

Step 8:
A window prompt will indicate that the configuration on the media hub has been completed.  Click OK.
 

Image



Step 9:
Once the Set Up Computer page appears, click Next.

 

Image


Step 10:
The Setup Wizard will automatically configure the media hub to Z Drive at the Drive Letter Mapped page. Click Next to continue. 

Image


Step 11:
When the configuration has been completed, check the Access the Media Browser now box and click Finish.

Image


Step 12:
Your web browser will automatically start and you will be directed to the media hub Media Bowser
 

Image

 

 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT