text.skipToContent text.skipToNavigation

Connecting the Media Link to Its Speakers.

This article will explain on how to connect the Media LInk to its speakers (WMLS11B only). If you did not run the Setup Wizard, first connect the Media Link, and then follow the instructions in the "Using the LCD Menus to Set up the Media Link" section. For instruction, click here.

 

Image



Step 1:
If you did not run the Setup Wizard, go to step 4. Otherwise, press the Media Link's power button on its front panel to power it off.

Step 2:
Unplug the power adapter from the Media Link's Power port and electrical outlet.

Step 3:
Unplug the Ethernet network cable from the Media Link's Ethernet port and the Ethernet port of your PC, router, or switch.

Step 4:
Move the Media Link to the room where you want to hear music playing.

Step 5:
Line up the pegs of the right speaker with the mounting holes on the right side of the Media Link, and insert the pegs. Then slide the right speaker down until the pegs fit into the bottom of the mounting holes.

Do the same for the left speaker.

Image



Step 6:
Connect the color-coded RCA audio cable to the Media Link's 2 CH Output (left and right) ports and then connect the other end to the right speaker's INPUT (left and right) ports.

Image



Step 7:
Connect the RCA speaker cable to the right speaker's Connect To Left Speaker port and then connect the other end to the left speaker's Connect From Right Speaker port.

Image



Step 8:
Connect the speaker power cord to the Media Link's Speaker DC port, and then connect the other end to the right speaker's DC 12V port.


Image





Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT