text.skipToContent text.skipToNavigation

Connecting the PLTE200 to the modem and the computer

This article will show the user on connecting the PLTK300 to the router and the power socket.

NOTE:  This article assumes that the router is already configured and the computers are online. If not, set-up the router.

To set-up the router for Cable Internet Service, click here.

To set-up the router for DSL Internet Service, click  here.

To set-up the router for Static IP Account, click here.

Connecting a Router to the PLTE200

Take an Ethernet cable and connect it to the router. Take the other end of that same cable and connect it to port at the back of the PLTS200.

Step 1 :
Please connect one end of the Ethernet cable at the back of the modem and the other end at the back of the router.

Step 2 :
Choose and empty port at the back of the router and connect the Ethernet cable and other end of it at the back of the PLTE200.
 

Step 3:
Finally, connect the power adapter of the PLTE200 to the power socket. Linksys recommends that you plug the Adapter directly into an electrical outlet. The Adapter has its own power filter to help protect against surges.

NOTE: The image may vary depending on the modem, router, and the power socket you are using.


Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT