- Setting-up the Wireless Settings of the Wireless A/G Game Adapter
To connect the Wireless A/G Game adapter to a wireless network please know the following: SSID, Wireless Security and/or Network Key. If you do not know your wireless settings and you’re using a Linksys router, click here. If not consult the user guide or the manufacturer of your router for assistance.
Setting-Up the Wireless A/G Game Adapter
Connect the Wireless Game Adapter to your router using an Ethernet cable. For instructions, click here.
Access the Wireless A/G Game Adapter’s web-based setup page. For instructions, click here.
When the Game Adapter’s setup page appears, look for the SSID field and enter the wireless network’s SSID.
Look for Network Type and select Infrastructure.
If WEP is not enabled on the wireless router, look under Security and set it to Disabled then proceed to Step 10.
If WEP is enabled, under Security, select Enabled then click Edit Wireless Security and proceed to the step below.
When the WEP Encryption window appears, select the same Default Transmit Key as your router’s. In this example, we selected 1.
Select the same WEP Encryption level either 64Bit(10 hex digits) or 128Bit(26 hex digits). In this example we selected 64Bit(10 hex digits).
Enter the wireless network’s WEP Key based on the Default Transmit Key selected. Since we selected Key 1, we’ll enter the WEP Key in the Key 1 field.
When the Setup page appears, scroll down then click Refresh and select your wireless network’s SSID.
Once your SSID is selected, click Connect.
Click Apply and you’re done setting-up the Game Adapter.
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.