text.skipToContent text.skipToNavigation

Changing the Date/Time of WHA Devices

You can change the date and time for the DMC250 and DMC350 through the DMRW1000 Wireless-N Controller and the DMRIR500 Remote Control.

If you are using DMC250 or DMC350, follow the step-by-step guide below. If you are using the DMRW1000 Wireless-N Controller, click here.

DMC250/DMC350

NOTE: The screens below may vary depending on the device you are using.

Use the Navigation buttons on the device to navigate through the Menu.

Image

Step 1:
Navigate through the Menu until you come across Settings. Select OK.
 

Image


Step 2:
Choose General Settings and select Ok .
 

Image

Step 3:
Choose Date/Time and select Ok.
 

Image

Step 4:
Choose Set Time to configure the date and time and select Ok.

NOTE: By default, Date/Time is set to Auto Update unless manually configured.
 

Image

Step 5:
Use the Navigation buttons to select the Month. Next, select Ok.
 

Image

Step 6:

Choose a Day and select Ok.
 

Step 7:

Select the Year.
 

Image

Step 8:

Enter the Time and select Ok.

Image

DMRIR500 Remote Control

NOTE: Use the 4 way  Scroll-key    to navigate through the Menu on the device.

DMRW1000 Wireless-N Controller

NOTE: Use the Scrollwheel to navigate through the Menu on the device.

Step 1:
Navigate through the Menu until you come across Settings. Select Settings.
 

Image

Step 2:
Select General Settings.

Image

Step 3:
Select Date/Time Set Up.   

Image

Step 4:
Select Set Time.

NOTE: By default, Date/Time Set Up is set to Auto Update unless manually configured.
 

Image

Step 5:
Select the Month.
 

Image

Step 6:
Select the Day.
 

Image

Step 7:
Select the Year

Image

Step 8:
Enter the Time.
 

Image

Step 9:
Press the OK button on the Scrollwheel.
 


 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT