Changing the wireless channel on the classic web-based interface

Interference is one of the most common problems your Wi-Fi may face.  This can be caused by distance or location, home electronic devices, neighboring Wi-Fi, and physical obstructions (walls, mirrors, or glass).  In order to resolve this issue, changing your router's wireless channel is highly recommended.  This process helps optimize your Wi-Fi connection and fix intermittent signal, thus improving your overall Wi-Fi experience. 

NOTE:  Available wireless channels may vary depending on your region.  Images and options may also vary depending on your router's model.

The steps below will guide you on how to change the wireless channel of your Linksys router using the classic web-based setup page.  To do this using your Linksys cloud account, click

Step 1:
Access the router’s web-based setup page.  For instructions, click here.
NOTE:  If you are using a Mac® computer to access the router’s web-based setup page, click here.
Step 2:
On the router's web-based setup page, click the Wireless tab.
User-added image
Step 3:
On the Basic Wireless Settings sub-tab, select Manual.  Choosing the Manual setup allows you to adjust your wireless channel according to your preference.  Once done, you can click Save Settings.
User-added image

For some models, you no longer need to select Manual.  Instead, you simply click on Wireless > Basic Wireless Settings, locate Wireless Channel then implement your changes through the drop-down menu. 
User-added image
QUICK TIP:  If you are using a simultaneous dual-band router, you need to do this for both 2.4 GHz and 5 GHz frequencies..
Step 4:
For the 5 GHz network, you can switch to either 20 MHz or 40 MHz for the Channel Width.  For the 2.4 GHz network, the available Channel Width is 20 MHz.
QUICK TIP:  To avoid interference with other 2.4 GHz networks in your area, Channel Width should be set to 20 MHz Only for both.
User-added image
Step 5:
Click the drop-down arrow for Channel, then select your preferred channel.  In the example below, the 2.4 GHz network is on Channel 6.

QUICK TIP:  The recommended channels for the 2.4 GHz network are 1, 6, 9 and 11 since they are considered non-overlapping channels.  For the 5 GHz network, channels 36, 40, 44 and 48 are recommended to less likely encounter interference.  For the Linksys Wi-Fi Routers, it is best to leave the channel to Auto if you are not experiencing any connectivity issues.
User-added image

Step 6:
Click User-added image.

Was this support article useful?

Additional Support Questions?
Search Again