Launch Linksys Connect. To do this, go to Start > All Programs > Linksys Connect. For Mac® computers, access Go > Applications, then start Linksys Connect.
Click Router settings.
On the Personalize section, click Change.
A pop-up window will give you information about changing the router name and password. Click Yes if you want to proceed.
You can change the Router name (SSID) and Password. Then, click Change.
Your changes will be saved. This could take a few seconds up to a minute.
NOTE: You can create an Easy Setup Key by inserting a storage device into your computer’s USB port. This allows you to store the Router name and Password and use it to connect other wireless computers to your network. For instructions on how to create and update your Easy Setup Key, click here. If you choose not to, click on Cancel.
When wireless computers connect to your network, the Router Name and the Password you created will be your Wireless Network Name (SSID) and your Password or Network key.
The default wireless security type used in Linksys Connect is WPA™/WPA2™. It is recommended to use WPA2 Personal or WPA2/WPA Mixed Mode security mode for your Linksys Wi-Fi Routers to ensure that they operate at full data rates.
How to resolve Guest access issues using Linksys Connect