This article will guide you in setting up Port Range Triggering using the app. Before you start, make sure to check the following:
- Consult your device's documentation or online support site to find out what ports you need to trigger for your device since they differ for every application.
- If you are a DSL internet subscriber, your DSL modem should be set to bridge mode. Consult your modem's documentation or online help for instructions, or contact your internet service provider (ISP) and request that your modem be set to bridge mode.
NOTE: Steps and images may vary depending on the operating system of your mobile device. In the examples below, iOS and Android™ devices are used.
Connect your mobile device to your router's WiFi then open the Linksys app.
For iOS, tap Manage Your Wi-Fi. For Android, tap Log in.
You will be prompted to log in using your Linksys cloud account. Enter the necessary credentials and tap Log in.
NOTE: You can also choose to log in using Router Password on iOS or Use Router Password on Android.
On the Dashboard, tap the Menu icon on the upper-left corner.
Tap Advanced Settings and choose Port Settings.
Tap on Port Range Triggering.
Tap on Add a rule.
Fill in the details for the Rule Name, Triggered Range, and Forwarded Range.
Configuring Single Port Forwarding using the Linksys app
Configuring Port Range Forwarding using the Linksys app