Linksys Cloud Manager: Settings page

The Settings page of the Linksys Cloud Manager allows you to configure the settings of the entire network that you have selected.  To get to the Settings page, log in to the Linksys Cloud Manager.  Select the name of your network then click on Settings. 
 
Before you begin:
  • This article is only for access points being managed by (Cloud Manager 1.0) https://business.linksys.com/.  Visit the online documentation to learn more about the Linksys Cloud Manager 2.0.
  • Make sure you have selected the correct network by checking the top-left section.
 
Settings page sections:

 
General
Network-wide configuration
Notifications


General
 
This section allows you to configure the general settings of your network.
  • Icon – Displays your network icon.  You can click on Edit to change the icon.
  • Name – Displays your network name.  You can click on Edit to change the name of your network.
  • Note – Click on Edit to add notes for the network.
  • Delete network – Click on the Delete button to permanently delete a network.
NOTE:  Click Save after changes are made.
 
User-added image
 
Network-wide configuration

This section allows you to configure specific settings for all access point within the network.


IMPORTANT:  Any changes made in this section will be applied to all access points within the selected network.  If you want to configure a specific access point, go to the Access Points page > select an access point > click on the More tab.
 
User-added image
 
Below are the settings you can configure in this section:
 
 
Time Zone – Configure your time zone for all access points associated in the network.
 
Step 1:
Click Edit.

 
User-added image

Step 2:
From the drop-down menu, select your Time zone.

User-added image

Step 3:
Configure the NTP Server 1 and the NTP Server 2.

User-added image

Step 4:
Click User-added image.
 
Local Access credentials – Configure your local admin password for your access points.
 
​​NOTE:  The default username and password are both admin.
 
Step 1:
Click Edit.

 
User-added image
 
Step 2:
Enter your new Password.  You can also add an optional password hint.

User-added image

Step 3:
Click User-added image.
 
Remote syslog – Send logs to the syslog server.
 
Step 1:
Click Edit.

 
User-added image

Step 2:
From the drop-down menu, select Enabled.

User-added image
 
Step 3:
Enter your client’s IP address in the field.

User-added image

Step 4:
Click User-added image.
 
LED light – Toggle the switch to enable or disable the access point's light indicator.
 
Step 1:
Click Edit.

 
User-added image
 
Step 2:
From the drop-down menu, select your preferred setting.  By default, Enabled is selected.

 
 User-added image
 
Step 3:
Click User-added image.

 
Notifications
 
This section allows you enable email notifications when an access point goes offline.  To do this, follow the steps below.

 
User-added image
 
Step 1:
Click Edit.

User-added image
 
Step 2:
Select the Send an email radio button.

User-added image
 
Step 3:
From the drop-down menu, choose a time interval for the notification to be sent when the access point goes offline.

User-added image
 
Step 4:
You can send an email notification to all network members or to specific people only.  To send an email to specific people, uncheck All network members.  Click Add people then enter an Email address, then click User-added image.

User-added image

User-added image


 

Step 5:
Click User-added image.

Was this support article useful?

Additional Support Questions?
Search Again