Upgrading the Linksys RE6700’s, RE6300's and RE6400's firmware
QUICK TIP: There are three (3) methods to log in:
- Enter "http://extender.linksys.com" in the Address bar.
- Enter the range extender’s IP Address.
- For RE6400, RE6300 and RE6700, enter http://RE6x00-xxx for Window users or http://RE6x00-xxx.local for Mac® users, where xxx are the last three (3) characters of the range extender's MAC Address.
You will be prompted for a Password. If you have changed your password, enter your custom password. Otherwise, enter the default “admin” on the Password field then click Login.
On the web-based setup page, click Firmware Upgrade under Administration.
There are two (2) methods in upgrading.
The progress of the upgrade process will be shown on the same page. To prevent any problems with the range extender, do not interrupt the upgrade process.
Resetting the range extender to factory default settings
Setting up your Linksys AC1200 Amplify Wi-Fi Range Extender, RE6700
Setting up the Linksys AC1200 Boost EX Wi-Fi Range Extender, RE6400
Setting up the Linksys RE6300 AC750 BOOST Wi-Fi Range Extender