Using the Site Survey feature of the Linksys WAP1200AC AC1200 Wi-Fi Access Point

The Site Survey feature of your Linksys WAP1200AC AC1200 Wi-Fi Access Point displays all the wireless networks within range.  It also helps you determine where to properly place your Linksys WAP1200AC between your wireless router and the area with poor signal.
 
NOTE:  The Site Survey is ONLY available if your Linksys WAP1200AC is in Range Extender mode.  For Range Extender mode set up instructions, click here.
 
Follow the instructions below to learn how to use the Site Survey feature of the Linksys WAP1200AC.

 
Step 1:
Open a browser to log in to the web-based setup page of your range extender.  For instructions, click here.
 
Step 2:
Under Wireless, click Site Survey.

 
User-added image

The Site Survey page will then be displayed.
 
User-added image
 
• Select - clicking the radio button beside the wireless network name (SSID) selects the SSID
• SSID - displays the name of available wireless networks
• GHz - indicates the radio band of available wireless networks
• Signal - displays the relative position of the available networks within range by indicating the power of the wireless signal received
 
QUICK TIP:  If a Signal with no green bar is displayed, the Linksys WAP1200AC is located too far from the router.  For optimum performance, place your Linksys WAP1200AC near the router to keep the signal strength between 60% and 100%.
 
• Security - displays the security type used by available networks.  If a network supports Wi-Fi Protected Setup™ (WPS), the WPS User-added image icon is also displayed.
 
Associating the Linksys WAP1200AC with an access point or router
 
Step 1:
Under Site Survey, click the radio button that corresponds to your wireless network name (SSID) and then click Connect.
 
User-added image
 
QUICK TIP:  You can click the User-added image button to scan for any available wireless networks and refresh the list.
 
Step 2:
Enter your wireless network password in the Passphrase field then click Connect.
 
NOTE:  The type of security information required in this screen should match your access point's or router’s wireless security settings.  The wireless password is also case-sensitive.

 
User-added image
 
Wait for the process to be completed.
 
User-added image

You should have successfully configured your Linksys WAP1200AC with your wireless network.  You can proceed with connecting wireless computers and devices to get Internet access. 
 
QUICK TIP:  To know if your Linksys WAP1200AC is connected to the network, click Status > WLAN Statistics.
User-added image
 
The Network Name (SSID) should display your router’s wireless network name.
 
User-added image
 
QUICK TIP:  If you encounter any issues, a firmware upgrade may resolve it.  You can download the latest setup software of your Linksys WAP1200AC in the Linksys WAP1200AC Downloads site.

Was this support article useful?

Additional Support Questions?
Search Again