Setting up the Linksys LAPAC2600 Wireless Access Point using the Quick Start Wizard
This article will guide you on how to set up your Linksys LAPAC2600 using the Quick Start Wizard.
Power on your Linksys LAPAC2600 then, using an Ethernet cable, connect it to your wireless router.
Open a web browser and enter the IP address of your Linksys LAPAC2600. Your router will automatically assign an IP address on the access point once you connect it via Ethernet cable.
Enter your access point’s Username and Password. Then, click the Log in button.
QUICK TIP: The default Username and Password of the Linksys LAPAC2600 is admin.
Select the Quick Start tab and click the Launch… button.
Enter a new administrative User Name, AP Password and Re-enter to Confirm in the fields provided. Then, click Next.
Configure the system settings as needed and click Next.
Configure IP settings as needed and click Next.
Enter your preferred wireless network name (SSID) in the SSID Name field and click Next.
Enter your wireless Security key or Passphrase in the Pre-shared Key field and click Next.
Review your wireless settings and click Submit.
You have now successfully set up your Linksys LAPAC2600 as an access point. Click Finish.
Getting to know the Linksys LAPAC2600 (VIDEO)
Setting up the Linksys LAPAC2600 (VIDEO)
Configuring the Captive Portal feature of the Linksys LAPAC2600 (VIDEO)
How to copy or save configurations within your Linksys LAPAC2600 Wireless Access Point (VIDEO)