Linksys LAPPI30W High Power Gigabit PoE+ Injector specifications

The Linksys LAPPI30W High Power Gigabit PoE+ Injector offers a quick and easy setup with plug and play installation.  It has Power over Ethernet (PoE+) capability that can provide up to 30W power supply.  It also reduces the wiring cost of AC power by using a standard CAT5, CAT5e or a preferred better cable that can carry both power and data to PoE devices.

The table below lists the specifications of the Linksys LAPPI30W.
 
SpecificationDescription
PortsOne gigabit LAN port
One gigabit data and power output port
Standards802.3 10BASE-T
802.3u 100BASE-T
802.3ab 
802.3at/af PoE
Power lightGreen
Dimensions99 mm x 68.5 mm x 33 mm (L x W x H)
Weight149.6 g
Power100V - 240V
Operating and storage temperatures

Operating:  0°C to 40°C (32°F to 104°F)

Storage:  -30°C to 80°C (-22°F to 176°F)

HumidityOperating:  5% to 90% RH or less, non-condensing
Storage:  5% to 90% RH or less, non-condensing

Was this support article useful?

Additional Support Questions?
Search Again