How to disable Wi-Fi (D-Link)

This article will walk you through general instructions on how you can turn OFF the Wi-Fi on your D-Link® router. 

Before you begin, make sure the computer you use is turned ON and connected to the Wi-Fi. 
NOTE:  Steps and instructions may vary depending on your router’s model.
Step 1:
Launch a browser and type in the IP address "" to access the router’s configuration page then press [ENTER].
Step 2:  
Enter the login credentials for your device.

NOTE:  The default username is admin then leave the default password blank.

Step 3:
Click on the SETUP tab and then click WIRELESS SETTINGS 

User-added image

Step 4:
Select the Manual Wireless Connection Setup button located at the bottom of the page.  
Step 5:
Uncheck the Enable Wireless option.
User-added image

NOTE:  If you are using a dual-band router, make sure to disable both 2.4 GHz and 5 GHz Wi-Fi.
Step 6:
Click Save Settings.

The network should now appear as disconnected on your computer.

Was this support article useful?

Additional Support Questions?
Search Again