- Troubleshooting tips to successfully connect to the wireless network
Any wireless device connected to a router that is already configured and working should be able to access the Internet. However, if you are having difficulty connecting some or all devices wirelessly, perform the following steps to resolve the issue:
Check the IP Address of the computer
An IP Address serves as the computer or device’s ID in the network and is automatically assigned by the router. A valid IP Address is an indicator that the computer is connected and communicating to the router. For instructions on how to check your computer’s IP Address, click here.
Verify the wireless settings of the Linksys router
There are two (2) wireless settings on the router that you need to identify when wirelessly connecting to the network:
- Wireless Network Name or Service Set Identifier (SSID)
It is the wireless network name being broadcasted by the router. When you scan for available wireless networks on your computer, the SSID should be listed on your computer’s wireless configuration utility.
- Wireless Security Settings
It is the encryption method used to protect a wireless network from intruders. This allows you to set up a password to secure your wireless network.
For instructions in verifying the wireless settings of your Linksys router, click here.
Verify if MAC filtering is enabled in your network
MAC filtering allows you to prevent or permit the MAC Addresses specific devices from accessing your network. MAC stands for Media Access Control address. This uniquely identifies your computer on the Internet or within the network. There are no identical MAC Addresses. If you are not able to access the Internet, the current MAC filtering may have not included your computer’s MAC Address in the list of devices allowed to access your network. To learn more about MAC filtering, click here.
Disable the computer’s firewall
Antivirus programs also have firewall included in their features to add protection to the computer. Some firewall software blocks communication to and from the computer. Hence, your computer will not be able to acquire the IP Address assigned by the router. In such cases, you will need to disable any firewall installed on your computer. To learn how to disable Windows Firewall, go to Control Panel > Windows Firewall > Turn Windows Firewall on or off.
To learn more about configuring these third-party firewalls, select the antivirus that your computer is using:
NOTE: If your antivirus is not listed above, refer to your antivirus’ product documentation to learn how to configure its firewall settings.
Disable proxy settings
The proxy server setting is a medium between your computer and the Internet. This sets a limitation to what websites your computer is allowed to access. If a computer is connected to a router as a gateway for the Internet connection, it no longer needs to get any proxy settings to gain access. To disable Internet Explorer proxy settings, launch Internet Explorer, click Tools > Internet Options > LAN settings. To learn how to disable the proxy settings on a Mac OS®, click here.
Ping the router
A Ping test helps to trace the communication between the computer and the router. The computer sends packets to the router and in return, the router sends out replies to validate the connection. To learn how to check your computer’s connection to the router through Ping test, click here.
Ping the Internet
After pinging the router, you may proceed to checking the connection between the computer, router, and the Internet. To check the computer’s connection to the Internet you should get valid replies when you perform a Ping test. To learn how to check your connectivity to the Internet through Ping test, click here.
QUICK TIP: If your computer is still having difficulties connecting to your wireless network but other wireless computers are able to do so, try to isolate the problem by connecting it to other wireless networks available.
If other wireless computers are having the same issue connecting to the wireless network, you might need to upgrade the firmware of your router. Click here for instructions.
If you are still experiencing issues with connecting to the wireless network with your computer after upgrading the firmware of your router, the driver of your computer’s wireless adapters may not be updated. You may refer to your computer’s documentation to learn how to update the drivers of your computer’s adapters.
Checking the DNS Servers on a Linksys router
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
Additional Support Questions?
LINKSYS LIVE CHAT
Help With Linksys.com
I have a question about a Linksys product or a Linksys Store promotion.
Get help with an issue or learn how to maximise the potential of my Linksys product.