Upgrading the Linksys range extender's firmware

Similar to routers, Linksys range extenders also have firmware updates that can fix some issues that you may encounter while using the device. The new firmware may provide enhancements to the functions of the range extender and may be able to refresh the device to prevent and resolve dropping or intermittent connection.

Before proceeding with the firmware upgrade, make sure that you have done the following:
 
  • Download the latest firmware for your range extender from the Linksys Support Site. For instructions, click here.
  • Make sure that you download and save the file to the computer which you will use to update the range extender’s firmware.
 
IMPORTANT: Do not upgrade the firmware of the range extender unless you are experiencing problems when using it or the new firmware has a feature you want to use.

To upgrade the range extender’s firmware, follow the steps below:

Accessing the range extender’s web-based setup page

To upgrade the range extender’s firmware, follow the steps below:
 
Step 1:
Connect the range extender directly to the computer using an Ethernet cable. Make sure that the range extender is not connected to the router when performing the upgrade.

Step 2:
Access the range extender's web-based setup page by opening a web browser and enter “192.168.1.1” on the Address bar. This is the default IP address of the extender.

NOTE: If the range extender is already configured, you may either enter “http://extender.linksys.com” in the Address bar or check the router’s DHCP Client Table and look for the range extender’s IP address.


Step 3:
A pop-up window will appear, asking for a User Name and a Password. Enter “admin” on both fields then click Log In.
 
User-added image

Upgrading the range extender’s firmware

Click on your range extender’s model to learn how to update its firmware:


Linksys RE6700, RE6300 and RE6400
Linksys RE6500, RE3000W v2, or RE4100W
Linksys RE1000, RE2000, RE3000, RE3000W, or RE4000W

 

Step 1:
On the web-based setup page, click Firmware Upgrade under Administration.
User-added image

Step 2:
Click Choose File.
User-added image

Step 3:
Select the firmware (.bin) file that you have downloaded earlier then click Open.

Step 4:
Click Start Upgrade.
 
The progress of the upgrade process will be shown on the same page. To prevent any problems with the range extender, do not interrupt the upgrade process.
User-added image
 
Step 1:

On the web-based setup page, click the Administration tab then click on Firmware Upgrade sub-tab.
User-added image

Step 2:
Click the Browse… button.

Step 3:
Select the firmware (.bin) file that you have downloaded earlier then click Open.
User-added image

Step 4:
Click Start Upgrade.
User-added image

The progress of the upgrade process will be shown on the same page. To prevent any problems with the range extender, do not interrupt the upgrade process.
User-added image

Step 5:
When the upgrade has been completed, click Continue when prompted.

Your range extender is now upgraded to the latest firmware version.


Related Articles:


Manually configuring a Linksys Wireless-N Range Extender

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋