text.skipToContent text.skipToNavigation

Encountering Difficulties when Connecting a Wireless-G Game Adapter to a Non-Linksys Router

NOTE:  Before connecting your Wireless-G Game Adapter to a non-Linksys wireless router, take note of your Wireless Network Name (SSID), Wireless Security and/or Network Key.  If you do not have these settings, consult your wireless router’s user guide or contact the manufacturer for assistance.

Setting-Up the Wireless-G Game Adapter 

Step 1:
Connect the Wireless-G Game Adapter to your router using an Ethernet cable.  For instructions, click here

Step 2:
Access the Wireless-G Game Adapter’s web-based setup page.  For instructions, click here

NOTE:  If you are using Mac to access the Game Adapter's web-based setup page, click here

Step 3:
When the Game Adapter’s setup page appears, look for the SSID field and enter the wireless network’s SSID. 

Step 4:
Look for Network Type and select Infrastructure

Step 5:
If WEP is not enabled on the wireless router, select Disable then proceed to Step 10

If WEP is enabled, select Enable then click WEP Key Settings then proceed to the step below. 

Step 6:
When the WEP Encryption window appears, select the same Default Transmit Key as your router’s.  In this example, we selected 1

Step 7:
Select the same WEP encryption level either 64Bit(10 hex digits) or 128Bit(26 hex digits).  In this example we selected 128Bit(26 hex digits)

Step 8:
Depending on what default transmit key is selected, enter the wireless network’s WEP key.  Since we selected Key 1, we’ll enter the WEP key in the Key 1 field. 

Step 9:

Click .  

Step 10:
On the Setup page, click Refresh and select your wireless network’s SSID. 

Step 11:
Once your SSID is selected, click Connect

Step 12:
Click Apply and you’re done setting-up the Game Adapter.

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT