text.skipToContent text.skipToNavigation

Upgrading the firmware of a WPSM54G

This article will guide you on how to upgrade the firmware of a WPSM54G (Wireless-G PrintServer with Multifunctional Printer Support).  To do this, follow the steps below:

QUICK TIP:  Check the Firmware Version of your PrintServer before and after upgrading.

Step 1:
Go to Linksys Support Site.

Step 2:
Download the latest firmware of your PrintServer.  For instructions, click here.

Step 3:
Access the Wireless–G PrintServer’s web-based setup page.  For instructions, click here.

Step 4:
Click the Status tab and then click the Upgrade button.

Step 5:
In the Firmware Upgrade screen, click the Browse button.

Step 6:
Select the firmware file that you downloaded and saved on your computer then click Open.

QUICK TIP:  The firmware file has a .bin extension.

Step 7:
Click Start Upgrade.

Step 8:
On the Message from webpage screen, click OK.

Step 9:
The Upgrade Firmware process will now start.

IMPORTANT:  Do not interrupt the firmware upgrade process.  Disrupting the process may damage the device permanently.

Step 10:
As soon as the Firmware Upgrade process is finished, a window will appear and indicate that the process is complete.

Your PrintServer’s firmware is now updated.

 

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT