Overview of the Linksys Max-Stream Tri-Band Router's light behaviors

The Linksys EA8300 Max-Stream AC2200 Tri-Band WiFi Router and the Linksys EA8250 Max-Stream AC2150 Tri-Band WiFi 5 Router offer ample bandwidth for simultaneous 4K and HD video streaming, next-gen online gaming, and other data-heavy activities. This article will show you the light behaviors of the Linksys EA8300 and Linksys EA8250.

 

Light

Color

Activity

Description

Power
(Backlight Linksys logo)


User-added image

White

OFF

Power OFF

Flashing (0.7 Hz)

(0.7 seconds ON, then
0.7 seconds OFF)

Booting / system self-test / firmware
upgrade

Solid

Power ON / device is ready

Internet Connection

User-added image

Orange

OFF

The internet connection is normal.

NOTE: When Wireless Bridge / Wireless Repeater / Wired Bridge mode is enabled. This light is always OFF.

Blinking (1 Hz)

(0.5 seconds ON,
then 0.5 seconds OFF)

Error (Hardware)

This light alternates with the WAN Physical connection light User-added image to indicate error found during system self-test (e.g., hardware / memory error).

Solid

Internet connection error

WAN Physical Connection

User-added image

Orange

OFF

Device works normally

NOTE: When Wireless Bridge / Wireless Repeater / Wired Bridge mode is enabled. This light is always OFF.

Blinking (1 Hz)

(0.5 seconds ON, then
0.5 seconds OFF)

Error (Hardware)

This light alternates with the internet connection light User-added image to indicate error found during system self-test (e.g., hardware / memory
error).

Solid

WAN port does not have physical connection
up (Link down)

Wi-Fi Protected Setup™ (WPS)


User-added image

 

NOTE: The WPS button is located on the left side.





 

N/A

OFF

Idle / OFF

NOTE: The light is used for pairing actions. The default state is idle, NO WPS activity.

White

Blinking

1 second ON, then 1 second
OFF; continues
until pairing
succeeds or after 2
minutes –
when the pairing fails

WPS in progress – up to 2 minutes

White

State persists (solid)
for 5 seconds

Successful pairing

Orange

Blinking

1 second ON, then
1 second OFF; state
persists for 1
minute

Pairing failure. Unable to connect to the client.

USB port

User-added image

Green

OFF

No device connected

ON

Device connected

Flashing

USB is actively reading / writing

Ethernet
(LAN port)

User-added image

Green (Link)

OFF

Link is down

Solid ON

Device is connected and Link is up

Yellow (Activity)

OFF

No Tx / RX activities

Flashing

Data transferring in progress

Internet (WAN port)

User-added image

Green (Link)

OFF

Link is down

Solid ON

Device is connected and Link is up

Yellow (Activity)

OFF

No Tx / RX activities

Flashing

Data transferring in progress


The following lights will not be affected by the Activity Lights control in the router's web-based setup page:

  • Illuminated Linksys logo (Power)
  • WPS light
  • Internet Connection error
  • Physical link error at Internet (WAN) port
  • USB light

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋