text.skipToContent text.skipToNavigation

Manually upgrading your Linksys Wi-Fi Router's firmware

Firmware updates are bug fixes and functionality enhancements for the router.  Keeping the firmware of your Linksys device updated is important because it fixes issues you may encounter while using it.  An updated firmware downloaded from the Linksys Support site may also contain device feature enhancements that are not available in the previous versions.  

Your router is capable of either an automatic or manual firmware upgrade.  This article will show you steps on how to manually upgrade your Linksys Wi-Fi Router's firmware.  If you are using a Linksys Smart Wi-Fi Router, click here for instructions.
 
IMPORTANT:  To prevent upgrade failures, the following items must be checked before proceeding with the upgrade process.
 
  • Use a wired computer for stable connectivity.  It is NOT recommended to update the firmware via Wi-Fi as it may cause permanent damage to the router.
  • Use another browser if your default browser does not work.  Alternatively, you can use another computer to perform the upgrade.
  • Download the correct firmware and version for your device.
  • If you have a storage device connected to the router, make sure to remove it before upgrading the router’s firmware to prevent data loss.
  • Make sure that you have created a backup configuration.  For instructions on how to create a backup, click here.
 
To manually upgrade the firmware of your router, you need to complete the following steps:

NOTE:  Steps and images may vary depending on your router's model.
 
Checking the model and version of your router

You should find the model number and serial number on the router's label at the bottom.
 

NOTE:  Identifying the appropriate model and version number will help download the correct firmware.  If your router has no version number, this means that your device is a version 1 model.  To learn how to find your device's model number, click here.

 
Download and save the firmware from the Linksys Support Site to your preferred destination folder (i.e., Desktop, Downloads) in your computer.  If you need more help in downloading the firmware, click here.
 
NOTE:  The firmware format is .bin, however, some may have a different extension such as .img and .bix.
 
 
Step 1:
Launch a web browser and enter “192.168.1.1” in the Address bar then press [Enter].  If the IP address does not work or if it has been changed, check your router's local IP address.  For instructions, click here.


Step 2:  
Enter your login credentials.  The default password is admin.  If you changed or personalized your password, use that instead.  


Step 3:
Click on Administration > Firmware Upgrade.

User-added image 

Step 4:
Click the Browse… button.


NOTE:  Some routers have a Choose File button. 
 
User-added image 

Step 5:
Locate and select the file that you have downloaded then click Open.
 
User-added image 

NOTE:  If you are using Mac OS X®, click the Choose button.

Step 6:
Click the Start Upgrade button.


NOTE:  Some routers display Upgrade only.
 
User-added image 

IMPORTANT:  Do NOT turn OFF the power or press the reset button of the router during the upgrade process.
 
User-added image 

If you have selected an incorrect file, a prompt similar to the image below will appear.  If this happens, click the OK button and repeat Steps 2 to 4 and select the correct file.
 
User-added image

Step 7:
Click Continue when it prompts that the upgrade has been successful.

Step 8:
Turn the router OFF then turn it back ON.

You should now have manually upgraded the firmware of your Linksys Wi-Fi Router.

Resetting and re-configuring the router
 
Resetting and re-configuring the router may be required if you have lost your internet connection after the upgrade or if connectivity issues prior to the update still exist.  For instructions on how you can reset your router, click here.  If you were able to back up your router's settings, click here to learn how to perform the restore configuration steps.  Otherwise, click on any of the links below to learn how to set up your router according to the internet connection type you are using:

Setting up a Linksys router with Cable Internet Service on a classic web-based setup page
Setting up a Linksys router with DSL Internet service

Setting up a Linksys router with a Static IP Account on a classic web-based setup page


Related Articles:

Upgrading the router’s firmware using the TFTP utility
List of Linksys devices’ downloadable files
Downloading Firmware and Driver for Valet, Valet Plus, and Valet Connector

Was this support article useful?

Additional Support Questions?

Search Again

CONTACT SUPPORT